The SIX is a high quality hexcopter frame that offers great looks and performance at a price that can't be beat! Built almost entirely from light weight yet rigid glass fiber, the SIX offers a great combination of weight savings and strength.
This hex frame features adjustable landing legs allowing you to adjust the frame to suit your needs. You can slide the landing legs out toward the edges to make it more stable on the ground and can also adjust the height.
The added lift capacity of a hex configuration makes this frame ideal for carrying larger payloads such as camera systems and other electronic components. This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics!
We offer a full line of multi-rotor electronics such as multi-rotor control board, ESC, motors and more, so it has never been easier or more affordable to get a hexcopter in the air!
All necessary hardware is included, just add your own electronics.
Weight: 625g (frame without electronics)
Motor Bolt Holes: 19mm width
Multi-Rotor control board
20~35A brushless ESC x 6
3~4S 2650~3300mAh lipoly battery
28-XX~35-XX 700~1000KV brushless motor x 6
9x5~10x5 propeller - 3 standard/3 reverse rotation
Hmotnost ( g )
The frame arrived well-packaged and took 15-30 minutes to easily assemble. Instructions were not included but there are some under the 'Files' tab. Have not yet tested this frame for vibrations, but it is likely to produce little - I found that all joins were tight and rigid. Great value for money.Just got the kit today and on first impressions looks good.
The one BIG problem, which I thought may have been rectified following the last review, is there is NO plans with the kit.
This may not be a problem for some, but, for people like myself who are disabled, it can be a daunting task trying to put together the hundreds of small parts without any reference.
Please guys, it may be little cost for a good product but I for one, would gladly pay a few coppers more to have a couple of sheets of paper with information on how to put the thing together.First off I was really happy with it, eventhough landing gear is totally crap and will not survive any rough landing.
Motor mounts are loosely fitted to booms.
The booms will twist and wobble wich causes tremendous problems for a bit heavier model, I flew with about 3Kg total weight, with intermittent problems normally caused just after high power thrusts, this was traced to wobbling arms due to the high power torque, FC then tried to compensate an unstable frame.
at 3.5Kg the model was unflyable resulted in crash and broken arm beyond repair. No spare parts are available as of now.
Now I'm using the center soucer parts with custom ALU square boomsAnnoying issues with a few of the aluminum spacers they were mis-drilled and wouldn't accept screws from the one of the sides. The landing gears are EXTREMELY frustrating as they are very hard to lock into place where you actually want them they also do not move very freely. It took serious sanding just to get the parts to fit together. Overall though it was a good bargain considering the cost and strength of the materials.This kit is outstanding. Very easy to assemble. I was able to build it in 15 to 20 min with motor. Now I need to add everything ells. Cant wait to fly it. Very nice
Dieser Hex ist vom Preis-Leistungsverhltniss ganz gut. Leider gibt es auch Makken... Bei einigen Alu Bolzen war das Gewinde so krumm geschnitten das ich sie entsorgen musste. Ansonsten funzt der Zusammenbau ganz gut.
Beim Landen unbedingt drauf achten das das Aufsetzen immer sehr vorsichtig erfolgen muss! Das Landegestell ist sehr zerbrechlich und grazil.
Alles in allem passt der Hex schon...This is a great hex frame however you need to remember you are spending 20! A little bit of sanding is needed to get the legs to fit correctly (very simple) and there are no instructions..... not too difficult once you stop and think. Dont rush the build or think it is a 2 minute job!! Looks GREAT when built and nice size. I'll let you know how it flies!Der Hexcopter macht einen sehr stabilen Eindruck, der Zusammenbau ist auch ohne Anleitung uerst einfach. Da es sich hier um meinen ersten Multicopter handelt, bin ich auf die Flugeigenschaften sehr gespannt!Easy to assemble,
good quality of fiberglass,
fit and finish close just some little sanding for tight fit.
For KK2 need to drill holes on top plate.
Fly good, strong frame,
plenty of space for mounting.