SkyZone has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots.
The Skyzone FPV 200-SET was configured from the ground up to be plug and play, all cables are pre-made with matching connectors, so no soldering or guesswork is required. The set is so complete even a “Y” power splitter is included for powering the video receiver and a set of goggles or a monitor off a single XT60.
The set includes the TS5823 transmitter, and this little gem packs 200mW of ultra clean 5.8GHz power in a micro sized video/audio TX. Great for those looking to save size and weight while still getting great performance. The TS5823 is transmitting a full range of 32 channels and only weighs 10g. And the Plug & Play set includes not only a match cable set for the included Sony CCD camera but also cables for the GoPro as well. For power the cables have mini JST connectors and a battery balance port power adapter.
At the heart of the set is the RC832 Receiver, it is nice and small in size, great for easy integration into your ground station or DIY goggles, but big in quality and features. The receiver uses the same two button interface, making channels swapping a breeze. There are two independent A/V outputs for both audio and video. So you can use a monitor and a set of goggles or maybe a DVR to record your flight. The receiver comes with 2 power cable options for mini JST or “Y” XT60 for receiver and monitor/goggle power.
To finish the Plug & Play set off a Sony FPV tuned CCD camera is included with all matching cables and a set of 5.8GHz Circular polarized antennas for maximum performance. This set will get you FPV flying in no time, and a perfect match to the Quanum DIY goggles for a budget minded complete set.
• Plug & Play connection no soldering required
• Circular Polarized Antenna set included(LHCP)
• 32 channels: Cover A, B, E bands and F bands
• Two switching buttons for the band and channel with LED display on VRX
• Power off memory for last channel and band
• dual Independent video and audio signal outputs
• Micro sized VTX and light weight - perfect for use with small models
• 32 channels: Cover A, B, E bands and F bands
• Transmitter frequency: 5645-5945MHz with 200mW power output
• Transmitting distance > ~1500m (open area)
• 480TVL Sony CCD FPV camera
TS5823 V2 VTX Specs:
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23~24dBm
Operating Voltage: 7V~24V
Supply Current: 190mA
Audio Carrier Frequency: 6.5MHz
Dimension: 40mm x 23mm x 8mm
Weight: 8g (without antenna)
RC832 Receiver Specs:
Antenna connection: RP-SMA
Power input: 12V
Antenna impedance: 50Ω
Rx sensitivity -90dBm
Video impedance: 75Ω
Video format: NTSC/PAL auto
Dimension: 80x 65 x15mm
Sensor: 1/3 Sony CCD
Power: 7~13v (3s)
Polarization: left hand(LHCP)
dbi gain: 1.5
TS5823 5.GHz 200mW 32CH A/V transmitter
RC832 32CH Video receiver
30x30mm 480TVL Sony CCD camera
Circular Polarized antenna set (LHCP)
GoPRO USB to A/V cable (for using GoPRO as A/V input)
Plug & Play cable set for camera and VTX
XT60 power Y Wire set for receiver and goggles
Standard power wire set
A/V Cable set (RCA)
Standard wire lead
Balance plug to JST for CAM/VTX power
Spare DIY A/V cables
Hmotnost ( g )
Very nice product! Tested on a Black Widow 260, works like a charmGreat item and a great priceVery Bad reception. Only Works when im about 3 feet from it and the antennas are vertical. May be a channel issue havent really looked into it. As far as ease of use and setup very easy.im pretty amazed with this kit! i use it with the quanum diy V2 and i'm very happy with the result, i have nerver tried another kind of fpv set as this is my first one, but for sure, i will use this several yearsWell, works as advertised, sort of.. The system has llimited range with the included antennas. I can fly further line of site. Also, the signal is so sketchy sometimes I haven't been able to use it for FPV yet only to give "rides". The first time I tried to fly FPV I lost the aircraft because the signal was so bad I will keep trying with different antenna configurations. This would be adequate maybe for a small 250 racing quad.Very great! For my as a newbie its perfect. True plug and play.Mounted it on my 250 quad and plugged to DIY googles from Hobbyking. Picture quality is very good, the TX doesn't need any power filters, image is clear. Advantage of this set is very small and light TX, that fits great in my quad, however I think the TX antenna should have 90 degree RP-SMA plug instead of straight one - but that could be solved by buying an adapter avaible on Hobbyking too. Set comes in a nice box, the instruction with connecting diagrams and frequency table is included aswell as many cables to connect your own camera.The kit work right out of the box, not much else to it. The antennas are not the best I had connection issue with it, but a put a 90* bend on it and it fixed the connection problems from the antenna and the RX. the soldering and heat shrink feels cheap but it works. It does have nice packaging reminds me of the old I-pod shuffles box.
Great for first fpv set.The little 200mw video transmitter works quite well, is a great size and the camera is usable.
however, it seems that my video receiver is not as sensitive as the one in my fatshark goggles, these simply don't have the range.I purchased this along with the quanum v2 goggles, i find picture quality is very poor the camera is not really up to the job, the v2 goggles did not work as one red live wire under the heat shrink was broken, i have used a better camera but still suffer from poor screen resolution, overall not to impressed, i only flew around 300yds away an the picture was starting to break up.