Want to zoom through the air with jet like performance as well as landings as slow as a trainer?
The Sniper EP Pushy is a great introduction to speedy pusher prop models, with its predictable slow speed landings and responsive control the Sniper will have you confidently flying this fast aileron ship in next to no time.
Model comes 95% complete, you only need around 3hrs to assemble this kit.
Wing span: 36in
Wing Area: 248sq.in
Flying Weight: 450g
Motor: 400 / (Turnigy 28-26 1900kv)
Hmotnost ( g )
klasse verarbeitung einziger minuspunkt ist die servobefestigung mit dem vorgeschlagenem setup geht er gut wer stress mchte vesucht mein setup
tgy2836 2350 kv 40 aesc 11g metallgear servo 5,5x4,5 prop 4s lipo
damit sind locker 200 kmh und mehr drin fr ganz verrckte der motor vertrgt auch 5s dann aber 50 a escThe recomended motor is so small & yet so powerful.nice plane,, but cg extremely hard to achieve. i have used a 4s bat. and fitted it as far in the nose as i could. and im still about 10mm short. i fitted a innerunner inside the motor mount instead of outside of it. i have not tried the plane yet due to the cg problem. i could put some weight in the nose. but i dont want to had weight to the plane yet. the ply piece where the wing blot on, touches the servo arms and need to be modified a bit.
otherwise nice plane.. use a very light motor to avoid the cg problem.Here is my setup.
Turnigy Aerodrive SK3 - 3530-1460kv Brushless Outrunner Motor
TURNIGY Plush 60amp Speed Controller
Turnigy nano-tech 1800mah 3S 25~50C Lipo Pack
2 x Digital high torque bearing servo 12g/2.6kg
On this setup, it flies great and fast even on half trottle. Infinite vertical is no problem. Flight time is about 4 1/2 and 5 minutes.
I am not happy with the landing gear. It is too weak for this plane.
Managed to make it stronger after a few adjustments.
Bear in mind that this is NOT A BEGINNERS PLANE !
There is a video on YouTube. Search for "Whisper Jet".
Also look in the video section from the Hong Kong store for the setup and modifications made on this plane. Good luck !de bonne facture centrage difficile avec un gros moteurtop little plane, flies really well, but the landing gear is weak, i ended up epoxying it in to the wing and now its great, also use a metal engine mount as the original is very weak.I bought mine from the international warehouse 2 days before they got here, plane goes together well but i did not use the original mount
i used one of hobby kings metal mounts attached with blind nuts, found the landing gear very weak and it folded back in the wing on the 2nd landing but the grass was wet. flys like a jet and can be a bit touchy as i had no expo set but other than that it is good value for money and glides in well.Maiden flew my SNIPER today what fantastic peice of kit put the wheels on my and it flew a treat ,no bad vices take offs and landing good ,flew mine on 3cell but will up grade later to 4cell ,but very fast on 3cell set up thanks hobby kingI used a TR 35-36A 1450Kv motor, turning a TGS 7x6 prop on 3S 2200mAh Turnigy 30C Lipo. Power draw 400W - excellent thrust and speed! Initial ESC was a Plush 40A, but later installed the Mystery SBEC 40A to allow additional servos (see below).
Initial flights were handlaunch - a bit scary as this plane needs a bit of speed to fly, and the rear prop is a bit of a worry. Once flight proven, I installed retracts (micro pneumatic). It was a little cramped but still relatively simple. I also installed rudders.
I used HD digital micro servos for accuracy.
Overall I am VERY happy with this plane. It is fast and precise, and looks very cool, especially with the retracts. I don't recommend bothering with the fixed gear - it will simply end up ripping out. I secured the retracts using nylon bolts, so a hard landing with pull out the retract rather than damage the plane. This plane looks cool and flies great! Photos and videos in those sections.Very very good quality of the kit! Im very impressed.
retract system install download now [56kb] steering servo + nose retract download now [61kb] rudders install download now [199kb] Sniper PC with rudders and retracts download now [95kb] Underside with retracts installed download now [228kb] pneumatic retracts... up and locked download now [234kb] Manual download now [881kb] Manual download now [881kb] Battery Setup download now [1337kb] redesign of front landing gear - boostom download now [143kb] airducting for cooling - boostoman download now [144kb] electric retracts download now [2208kb] electric retracts download now [2208kb] custom motor cowell download now [1828kb] Custom push rod and rudder download now [1886kb] overall look with cowell, retracts, rudd download now [1815kb]