Tarot adds the new PRO680 to the popular 680 series of HexaCopter frames. The new 680PRO has been optimized with a larger available area for equipment and redesigned folding geometry making it even more convenient. This design has a lower center of gravity and is more stable with a stronger visual impact.
The PRO680 has high strength matte gold processed composite PCB circuit connections, making it more efficient and adding safety. The 16mm 3K hollow pure carbon fiber tube is all CNC processing, making it stronger and lighter than the aluminum version. The carbon arm’s folding seats were widened and 3 point support improved to prevent cracking and breaking with a better locked in feel.
The new carbon tube hardware set is made of imported fiber reinforced nylon material. The new folding bipod design and safety locks are improved to prevent impact forces from damaging the structure. The Pro680 has new adjustable motor mounting positions and wire harness protection.
The Tarot 680 series with its high portability, lends itself to off the beaten path flying and tasks such as aerial photography , remote sensing, mapping, life exploration and the list goes on. If you’re ready for a pro grade multirotor platform, look no further than the Tarot PRO680.
• Fold-ability for transportation and storage
• 3K carbon construction
• Gold plated PCB connections
• 15 Minute flight times (Dependent on setup)
• Folding landing gear
Size motor to motor: 685mm
Height from ground to lower rods: 180mm
Height from ground to top: 220mm
5ch Radio system
Propeller size: 12~13 inch carbon fiber propeller
Motor: 620KV 4006 brushless motor
Battery specifications: 14.8V 4000~5000mAh
Brushless ESC: 20~30A
Kapacita ( mAh )
Hmotnost ( g )
easy to setup and durable. love itParts missing from the kit. Hobbyking useless with regards replacement. Got this frame from the EU warehouse and hobbyking send 1 set of missing parts not the 2 as required so had to buy a full replacement frame as this was a build for a customer. Found its quicker to get a replacement frame from China than it is for hobbyking to sort out the problems. WONT BE BUYING AGAIN!!Good quality of carbon used.
Sturdy frame when all put together.
PDB is a bit awkwardly made in the upper center plate, and the battery connection tabs are also on the front when you would like to use the according canopy.
All in all that are a couple of improvements for TAROT to make.
A downside personally is the plastic T-piece on the lower part of the landing gear.
The grubscrew sollution is just not working... It is flimsy and if you go wrong you can't fasten them anymore.
My Advice: buy the original ALU CNC T-piece from tarot directly. That sollution is even LIGHTER!
But for the price it is definitely a verry good productSome parts were missing, but I was still able to build the whole frame and put it in the air. Manual could be better. Still, impressed with the frame quality and low overall weight.
My Tarot 680PRO test:
Tarot 680PRO heavy lift:
https://www.youtube.com/watch?v=cikLxBqk8_0This frame is amazing with the full carbon fiber. Very strong and very easy to put together. I would buy this frame again if I needed to. The only complaint I have is that the screws can strip somewhat easily and it is unusual screw so it is hard to find.Perfekt kann man nur Empfehlen, die Qualitt ist Super.
Die Anleitung die dabei ist aber sehr drftig.Good frame, all parts included, even some spare.
Currently I'm flying with emax 2213 - 935 KV motors and 4S 5000 mAh pack with no problems. My take off weight ~2.6 KG, flight time ~ 7-8 min (20pcnt power left after landing).
Really impressed with the Tarot 680 Pro, works well and is high quality! lots of spares too for when you land it hard etc!
Its easy to put together but I would suggest watching a video on youtube over following the instructions as they tend to be fairly lacking.
its easy to balance and can take a fair load!Awesome frame. I shortened the arms to make it about 550 size. Works perfect for me. Very compact.LOW QUALITY Plastics.
2 Arm locks broke on first use (red ones)
Brass inserts for motor mounts have pulled out of the plastic on 5 of the 24 holes. Pulled out as soon as ANY force was applied to the screw. Not talking about torquing them down to tighten the motor mounts to arms.
GARBAGE. Buy a different frame.
Tarot 680 pro download now [389kb] Motor Plate download now [128kb] Assembly tips and tricks download now [645kb] 680 Pro, 620kv, octo esc, dji naza m2, q download now [4570kb] motor and esc download now [2047kb] motor, ESC mounting download now [2282kb] motor, ESC mounting download now [2611kb] motor, ESC mounting download now [2047kb] 680Pro with Canopy download now [2609kb] Carbon plate on top with electronics download now [2383kb] land gear tube download now [1017kb] Tarot.680.Pro.Manual download now [4373kb] Tarot 680+3508/580KV+1455 props download now [801kb]