Registrovat

Product Finder

Nastavení

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registrovat

TowerPro 4130-7T 425g/400kv/72A Brushless Motor

TowerPro 4130-7T 425g/400kv/72A Brushless Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Váha:
450 g
SKU:
TP4130-7T
Popis
produktu

Towerpro 4130-7T
This is part of towerpros new breed of motors.
Improved bearing and shaft quality as well as tweaked stator and magnet design.

Spec.
Size: 51mm Diameter x 89.2mm L
Weight: 425g
Idle Current: 1.6A
Recomended Lipo Config: 5-6cells 
Constant: 400Kv
Shaft Diameter: 6mm
Max Efficency: 60A
Max Load: 72A
Max Power (W/60s): 1700
Suggested Prop: 15x10


Motor comes with sturdy alloy mount plate and spinner adapter shown (collet type). Grub screw and shafts retainer can be loosened to reverse shaft for different firewall mount locations.

 

Product
Specifications

Další informace

  • SKU:
    TP4130-7T
  • Brand:
    nedefinováno
  • Kapacita ( mAh )
    Ne
  • Hmotnost ( g )
    450.00
  • Délka:
    0.00
  • Width:
    0.00
  • Výška
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i put this motor in to a 60 inch hanger 9 sopwith camel 10lb with a 15-10 apce prop i use 4 2250 15c loong max batteries as a 4500 6cell and fly 10 minutes with better than scale power much more power than the reccommended setup from hanger 9 will hang for ever on the prop or till it falls off to tell side great thrust at take off and great climb rated highly reccommended
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor in a 150cm wingspan Katana S50 on the recommended Prop 16x8 powered by 3700mAh 5S Lipo. Max current is 37A, power is good to bring the plane vertical to sky. Motor, battery and ESC (also from TP) keep lukewarm. Overall performance and sound is great, I am very happy with this motor.

Cheers, Thomas
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for scalers! AT 6 about 4 kg!

7500 rpm with 6 cells 3900 and about 48 Amps! Prop Graupner Super Sonic 16 X 8!

(Normally for glow engines)

With 5 cells 3900 and same prop 6400 rpm with 38 Amps.

Also good for 3d Katana S 50 with 6 cells!

Great engine for low budget!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
We used this motor to convert a Hangar 9 Showtime 90 airplane using a Xoar 18X8 wood prop, an 75 amps ESC (Align) and a FlightPower 4900 6S EVO (20C. The final weight is 4,1Kg (9,04pounds). Power is 1600watts and peak RPM is 7200RPM. Flight time is around 6 minutes with the motor and pack barely warm after.

Video here:

http://www.youtube.com/watch?v=_TUnF7TaPRs
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm running this one in my H9 P-40 .60 size conversion. Plane weights 9 lbs. Using 6s2p 4400 Mah HXT batts, with an APC 15x10e prop, Im getting 1150 watts @ 7380 rpm. This pulls 54 amps static.Performs fantastic in my plane! Motor and batts come down cool after 6 minute flights, with plenty still left in the batteries. Motor provides plenty of power, and has been problem free. Soon I'll try a 16x10e prop, and pull a bit more out of the motor. I'm totally satisfied, and would buy another one of these!

Jag
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').