To celebrate the TrackStar 1/10th 80A Turbo brushless ESC and Motor receiving ROAR approval, HobbyKing are now introducing the TrackStar ROAR approved 1/10th Stock Class Brushless ESC and Motor Combo set!
The ESC features a CNC alloy case top which incorporates the heatsink for the Mosfets, neat terminal cups for both the battery input and ESC output cables. The ESC software has a large number of user programmable settings such as punch, initial brake, drag brake, boost timing RPM, boost timing, Turbo timing, Turbo delay, Turbo ramp, boost acceleration - allowing this ESC to be customised in nearly every way you could ever need for 1/10 scale on or off road racing!
The motor features a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.
Max Voltage: 2S Lipoly / 6 cell NiMH
Motor limit: 10.5T
Resistance: 0.0004 ohm
Operating current: 80A
Burst Current: 380A
Bec Current: 3A
Bec Voltage: 6V
"Blinky" mode (Non-timing mode): Yes
Operation Mode: Forward/Brake/Reverse; Forward/Brake Only
Initial Brake: 10% ~ 80%
Drag Brake: 0% ~ 40%
Brake Strength: 50% ~ 100%
Voltage Cutoff: None ~ 3.5V/cell
Punch Profile: Level 1 ~ 9
Neutral DeanBand: 1% ~ 8%
Boost Timing: 0deg ~ 60deg
Turbo Slope: 3deg/0.1s, 6deg/0.1s, 12deg/0.1s, 18deg/0.1s, 24deg/0.1s, Fastest
Turbo Timing: 0deg ~ 30deg
Boost Timing RPM: 2000 ~15000
Turbo Delay: Off, 0.05sec, 0.1sec, 0.15sec, 0.2sec, 0.25sec, 0.3sec, 0.35sec, 0.4sec
Boost Timing ACC: 50RPM/deg ~ 700RPM/deg
Reverse Speed: 25% ~ 100%
Drive Frequency: 8Khz, 16Khz, 24khz
Brake Frequency: 1,2,4,8,16Khz
Temperature protection: On/Off
Can Size: 540
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 28A
Max Watts: 190w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
ESC x 1
Motor x 1
Now officially approved by ROAR for 17.5 spec stock class race use!
Hmotnost ( g )
plenty of speed to do all the jumps/obstacles at my local track. very smooth power to get consistent lap times while feeling in control. performance is a 5 star imo, but sensor harness did not last long. cheap to replace and happy enough to order up a second combo for my car. i go faster with this 17.5 than i do with my 13.5 cause its easier to drive.This combo works fine and smooth in my Tamiya CR-01 crawler. The red anodised aluminium finish looks very cool shining through the chassis. Programming with the programming card Produkt ID: 9192000049 is just fun. Will buy some more for next projects.Good combo include cble sensor for my basher nitro circus 4x4 short course.I'm sure this is a great combo, but I find it quite annoying that the ESC has a multitude of programmable options (brake force, reverse, timing, boost etc.) but you can't get at any of them without buying the programming card. That's right, there's way to program with the use of 'beeps' through your transmitter. Between planes and cars, I now have a total of about 8 different programming cards; each one not compatible with the next. They should make a single USB dongle that works with software to program all these different ESC's. Not only do I now have to spend another $15 or so on yet another programming card, but I have to wait for it to arrive. At a minimum, the description should make it clear that you can only use the default settings unless you buy the programming card.