Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global

Turnigy 1015 Brushless Inrunner Motor 11500kv

Turnigy 1015 Brushless Inrunner Motor 11500kv

QTY:

Now save Uložit 0,00 € 0,00 €

9,69 €
Stock:
Váha:
29 g
SKU:
C1015-11500

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu
Micro brushless inrunner.

Spec.
Battery: 1 Cell 1S/3.7V
RPM: 11500kv
Max current: 4A
No load current: 3.7V/0.4A
Current capacity: 4A/1sec
Internal resistance: 0.51ohm
Dimensions: 10x15mm
Weight: 5.1g  (kv11500) (not including connectors)
Diameter of shaft:1mm
Length of front shaft:5mm
Suited for Mini EDF or micro brushless cars.
Product
Specifications

Další informace

  • SKU:
    C1015-11500
  • Brand:
    Turnigy
  • Hmotnost ( g )
    29.00
  • Délka
    65.00
  • Width:
    38.00
  • Výška:
    38.00
  • Kv (rpm / v)
    11500.00
  • Maximální proudy (A)
    4.00
  • Výkon ( W ):
    0.00
  • Délka B ( mm ):
    15.00
  • Může Délka D ( mm )
    14.00
  • Maximální napětí ( V)
    3.00
  • Hřídel A ( mm ):
    1.00
  • Unit Weight (g):
    5.1
  • Průměr C ( mm )
    10.00
  • Celková délka E ( mm )
    21.00
  • Odpor ( mh):
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
She's good, a bit bodged, especially considering she caught fire almost immediately but it makes an excellent paperweight. After it has burnt out, I did a watt meter test;

Voltage: 11.1v
Current: 0.0A
Pitch speed: 0kmh
Temperature: 115'C

I highly recommend buying some of these and using them as dead weight to balance your planes. When I no longer have any papers to weigh down with this motor, I will flog it on ebay.
Quality
Value
Overall
Quality
Value
Overall
Powered up and works but no other testing yet. Bought this because they are rarely in stock. Don't know what I'm gonna use it in yet. Very tiny motor! I may put it in a small edf or make a tiny profile foam jet. Any ideas? What does everyone else use it for?
Quality
Value
Overall
Quality
Value
Overall
I bought mine for the micro t, if you want to get it for the micro t you would have to make a custom chassis
Quality
Value
Overall
Quality
Value
Overall
i am testing this motor on 3s in the gws 30mmedf and 6blade cut to 3 rotor and the amazing thing it is holding up i havent took amp draw or trust measurements but 10 to 15 sec burst it isnt getting very hot but the motor is turning in its case so i will need to glue it in sense i have no screws for it ill do more testing in the morning probly to the piont i destroy it
Quality
Value
Overall
Quality
Value
Overall
Very tiny and light, not too much torque though. Still not sure for what application to use it. Works well with the 3A ESC.
Quality
Value
Overall
Quality
Value
Overall
Mine has just arrived but it is ball raced, I have read some reviews that say it is plain bushed. Have HK changed it ?



I intend to use it with 30mm GWS EDF, I can only get a 6 blade impeller, do you cut 3 blades off ?



Thanks



Rob
Quality
Value
Overall
Quality
Value
Overall
wanted to use it with 2S / 300 mah/ 30 mm
6 bladed ducted fan.

low trust, high temperature.

will use it for direct drive,
not for edf anymore.
Quality
Value
Overall
Quality
Value
Overall
Bought one of these to put in a 1S gearbox. Less than 1.6A current will spin a GWS 5030 prop at over 7500 RPM and produce over 50 grams of thrust, using a 4.2:1 gearbox. This just might be my new favorite 1S brushless motor.
Quality
Value
Overall
Quality
Value
Overall
good motor for micro t,not the same umbelivable power that the losi,but cheaper option,for a brushless convertion,use it with 2s lipo,gets a bit hot,but still works fine
Quality
Value
Overall
Quality
Value
Overall
very impressive super small motor. this really has some power hidden within. i tested it in the 30mm edf from gws and with 2s lifepo
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').