Turnigy 1811 Brushless Indoor Motor 1800kvDimension: 22mm x 18mm, 30mm(with shaft)
Weight: 11g (kv1800) (not including connectors)
Diameter of shaft:F2mm
Length of front shaft:F8.3mm
Lamination thickness: .2mm
Magnet type: 45SH
Download data files;
TURNIGY MOTOR DATA
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Motor wires will come loose easily.. Was soldering bullet connector when one of three wires just came loose.I ordered twice. Good motor.Really good mini brushless motor, I have fitted mine on a micro Zagnutz flying wing 28" with 5x5 prop and it is very quickVery good motor for my 130g RTF.
It draws around 2A so i can fly up to 30min on 2S 350mah LiPo. Very very good motor. Recommended!Good motor for multiplex fox - 130g, 2s 450mAh. Included prop and spin is very poor quality. Works fine with GWS 4530.Excellent little motor, great deal for the price. Can't complain when you can pickup a schmattering of 5 lil motors for under the cost of a store brand BL can. That way you can experiment with props and motors on your scratch builds.Tested with cox 5.5x4 prop- 8900 Rpm, 2 amp draw, with apcE 5x4 7800 Rpm 2.5 amp draw.
The screw down prop adapter was machined crooked and useless, the bullet connectors were nice though.
The motor ran smooth enough and had decent power for it's size and wind.Vraiment minuscule ,on se demande quoi en faireIgnore the bling, this is a soft motor - go for the silver 10g 2000Kv motor instead.
For this, max thrust on 2S I could achieve was:
GWS 7x3.5 7100rpm = approx 110g thrust
GWS 6x3 8200rpm = approx 105g thrust
an 8x4 only reached 4700rpm
GWS 6x3 10200rpm = approx 160g thrust
GWS 5x4.3 9600rpmOtimo pequeno motor, muita potencia para pouco tamanho. RECOMENDO