New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy 2211 Brushless Motor 1700kv

Turnigy 2211 Brushless Motor 1700kv

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

10,82 €
Stav:
Skladem
Váha:
47 g
SKU:
T2211-1700
WANT FREE SHIPPING? Click here to find out more!
Dimension: 24mm x 23mm, 34mm(with shaft)
Weight: 19g  (kv1700) (not including connectors)
Diameter of shaft: 2mm
Length of front shaft: 9mm
Lamination thickness: .2mm
Magnet type: 45SH

Max performance
Voltage: 2S
Max current: 3.5~6A/20S
Prop: 7x3.5~8x4.3
Pull: 180~250g
For 150g indoor flyer.


Download data files:
TURNIGY MOTOR DATA
  • SKU T2211-1700
  • Brand Turnigy
  • Hmotnost ( g ) 47.00
  • Délka 65.00
  • Width 38.00
  • Výška 38.00
  • Kv (rpm / v) 1700.00
  • Maximální proudy (A) 6.00
  • Odpor ( mh) 0.39
  • Maximální napětí ( V) 13.00
  • Výkon ( W ) 60.00
  • Hřídel A ( mm ) 2.00
  • Délka B ( mm ) 23.00
  • Průměr C ( mm ) 22.00
  • Může Délka D ( mm ) 8.00
  • Celková délka E ( mm ) 33.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

meiner war leider defekt! :-(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

meiner war leider defekt! :-(

Perfect replacement for the Mini J3 Cub motor also here on HobbyKing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect replacement for the Mini J3 Cub motor also here on HobbyKing.

Luft schn ruhig und zieht wie ein Groer. Pull-Angaben sind korrekt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Luft schn ruhig und zieht wie ein Groer. Pull-Angaben sind korrekt.

Motor does not work. I burned out ESC. With another ESC motor just try to turn. After few seconds motor smoking. I tried change timing and also smooth start but without success. Completely wrong! They do not have output quality process in a factory?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor does not work. I burned out ESC. With another ESC motor just try to turn. After few seconds motor smoking. I tried change timing and also smooth start but without success. Completely wrong! They do not have output quality process in a factory?

Cracking little motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cracking little motor

I like this motor (and its smaller cousin the T1811-2000). Have been doing some static bench tests and here's some info so far. Hope it's useful to others:

prop:Amps:Volts:Watts:Thrust(grams)
7x3.5:2.7:7.76:20.9:133
7x6:3.5:7.57:25.7:119
7x6:4.x:7.x:?:140 <- (put it here real quick to see thrust, but didn't keep it long enough to see other numbers as I didn't want to risk over current. After a few seconds at this amperage the motor was very very slightly warm to the touch)

Of the limited set of props I tested I'm going with the 7x3.5 as it keeps the amps down and, hence, flight times should be longer. I'm targeting a 3D foamie for this that has a AUW of around 93 - 105 grams.

Thanks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like this motor (and its smaller cousin the T1811-2000). Have been doing some static bench tests and here's some info so far. Hope it's useful to others:

prop:Amps:Volts:Watts:Thrust(grams)
7x3.5:2.7:7.76:20.9:133
7x6:3.5:7.57:25.7:119
7x6:4.x:7.x:?:140 <- (put it here real quick to see thrust, but didn't keep it long enough to see other numbers as I didn't want to risk over current. After a few seconds at this amperage the motor was very very slightly warm to the touch)

Of the limited set of props I tested I'm going with the 7x3.5 as it keeps the amps down and, hence, flight times should be longer. I'm targeting a 3D foamie for this that has a AUW of around 93 - 105 grams.

Thanks.

Neat, and small electric motor.

Power is good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Neat, and small electric motor.

Power is good.

I bought two of these for the tail of my cp heli. After installing the first one, i found that the set screws at the base did not properly fit in the holes. The second one was fine, so i guess i have one for spare parts. Works good, i'm gunna try the 2300kv next. Yes, i will buy two (just in case).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought two of these for the tail of my cp heli. After installing the first one, i found that the set screws at the base did not properly fit in the holes. The second one was fine, so i guess i have one for spare parts. Works good, i'm gunna try the 2300kv next. Yes, i will buy two (just in case).

I got a love/hate with these motors. I've bought 4 so far and use them exclusively in the Bonsai wing where they work great on a 2s 860ma Zippy with a 6amp Plush speedy. Flight times are well over 20 mins and gentle flying gets me to about 40 mins . With this setup, everything is almost cold to touch at end of flight. Won't quite hover though, but I reckon 3s would do it easy.



Here's the bad. The wires coming out of the motor are simply the ends of the windings which are twisted together. There is no support for the wires and since the windings are solid core (1 strand only), they cannot handle much flexing before they break. They're a real @ to solder back in place as they tend to break off at the base leaving almost no wire to work with. As I'm using these on Bonsai wings, there's not much protection and after a while, they will all fail unless you take some "Anti-Wire Flexing" actions to keep them safe.



Working with the Plush 6A ESC, they tend to work great when they're brand new, but after a week or so, they start cogging at start up. This seems to be motor related because if I connect another motor - no cogging. Mind you, sometimes they cog from brand new too. I suspect it's to do with resistance build up from flexing. I'm going to persist with these motors as I really like them when working well and will make more mods to make them reliable. Todays mod will b

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got a love/hate with these motors. I've bought 4 so far and use them exclusively in the Bonsai wing where they work great on a 2s 860ma Zippy with a 6amp Plush speedy. Flight times are well over 20 mins and gentle flying gets me to about 40 mins . With this setup, everything is almost cold to touch at end of flight. Won't quite hover though, but I reckon 3s would do it easy.



Here's the bad. The wires coming out of the motor are simply the ends of the windings which are twisted together. There is no support for the wires and since the windings are solid core (1 strand only), they cannot handle much flexing before they break. They're a real @ to solder back in place as they tend to break off at the base leaving almost no wire to work with. As I'm using these on Bonsai wings, there's not much protection and after a while, they will all fail unless you take some "Anti-Wire Flexing" actions to keep them safe.



Working with the Plush 6A ESC, they tend to work great when they're brand new, but after a week or so, they start cogging at start up. This seems to be motor related because if I connect another motor - no cogging. Mind you, sometimes they cog from brand new too. I suspect it's to do with resistance build up from flexing. I'm going to persist with these motors as I really like them when working well and will make more mods to make them reliable. Todays mod will b

bem pequeno e rpido. parece ser bom

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bem pequeno e rpido. parece ser bom

  1. 1
  2. 2
  3. 3
Customer files
elisa 180 x 90 fi 2 mm Download [150]
elisa 180 x 90 fi 2 mm Download [150]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!