Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy 2815 EDF Outrunner 3500kv for 55/64mm

Turnigy 2815 EDF Outrunner 3500kv for 55/64mm

QTY:

Now save Uložit 0,00 € 0,00 €

8,90 €
Stock:
Váha:
110 g
SKU:
T28151C3500

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu
Turnigy 2815 EDF Outrunner 3500kv for 55/64mm
 
Specs:
Kv- 3500
Dimensions: 51 x 28mm
Shaft: 2.3/3.0mm 
Voltage: 11.1V
Weight: 74g
No-load current: 1.9A
No-load RPM: 38460
Load current: 17.8A
Load RPM: 32780
Thrust: 485g
 
Mounting Hole Bolt Circle: 18mm
Mtg. Hole Number & Size: 4 x M2.5
 
Includes 2 shafts, 2.3 & 3.0mm
Product
Specifications

Další informace

  • SKU:
    T28151C3500
  • Brand:
    Ne
  • Hmotnost ( g )
    110.00
  • Délka
    90.00
  • Width:
    45.00
  • Výška:
    55.00
  • Kv (rpm / v)
    3500.00
  • Maximální proudy (A)
    17.80
  • Výkon ( W ):
    0.00
  • Délka B ( mm ):
    51.00
  • Může Délka D ( mm )
    17.00
  • Maximální napětí ( V)
    11.00
  • Hřídel A ( mm ):
    3.00
  • Unit Weight (g):
    74
  • Průměr C ( mm )
    28.00
  • Celková délka E ( mm )
    64.00
  • Odpor ( mh):
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)
Quality
Value
Overall
Quality
Value
Overall
I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.
Quality
Value
Overall
Quality
Value
Overall
Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.
Quality
Value
Overall
Quality
Value
Overall
Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.
Quality
Value
Overall
Quality
Value
Overall
Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').