Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy 3 Channel Servo Speed/Direction Regulator

Turnigy 3 Channel Servo Speed/Direction Regulator

QTY:

Now save Uložit 0,00 € 0,00 €

7,50 €
Stock:
Váha:
15 g
SKU:
TSSR-3

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu
A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action.
Weight: 3g
Input: 1 servo Channel.
Output: 3 Channels.
Options: Travel Speed & Travel Time in both directions.
 
Product
Specifications

Další informace

  • SKU:
    TSSR-3
  • Brand:
    Ne
  • Hmotnost ( g )
    15.00
  • Délka
    102.00
  • Width:
    5.00
  • Výška:
    65.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wont work on retracts, to much current draw by the servo for it to slow it down, just stops if you try to slow it.
only works one way on flaps, sadly on the up and not the down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Doesn't work for on servoless retracts all you get is a delay in movement no speed control at all. What I ended up doing was running a split lead to the rx, one direct to one retract so works at normal speed and then the other retract lead to this unit and adjusted the delay - as there is no speed control as such, so looks like on leg is coming up slower - its in a Spitfire so gives the effect but a little bit disappointed, or am I missing something!! Electronics not my strong point!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I really love these & regularly add one to my International orders - I now have about a dozen installed in a range of models!...... They provide brilliant, realistic slow transition of flap servos for older transmitters, like my 2.8 converted Futaba FF9s that cant be programmed to do this at the TX for switched channels. Although my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still prefer to use this "hard wired" solution in the model itself.. One potentiometer sets the down transition time for all outputs another sets the up time & the third can reverse one output, to cater for physically mirrored servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I really love these & regularly add one to my International orders - I now have about a dozen installed in a whole range of models !.... .. They provide really brilliant, realistic slow transition of flap servos when used with older transmitters, like my 2.8 converted Futaba FF9s that cant do this for on/off switched channels. Even though my Tarranis TX can be programmed to transition switched channels slowly, for the sake of a fiver & a few grams, I still much prefer to employ this "hard wired" solution installed in the model itself.. Servo transition time for all outputs is set on one potentiometer & one of the outputs can be reversed to cater for physically mirrored servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my second servo speed regulator from HobbyKing, no problem both working perfect,switch1 & switch 2 Speed Settings slow fast works ok.CH3 normal and reverse sensitivity great on flaps and landing gear
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was suprised how small this regulator is. It's very handy, basically a landing gear/gear door/flaps sequencer.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good product, what a nice design, must have for all RC plane model. It's so small and weight add like nothing...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I own this product and I believe many of the previous posts are inaccurate. You cannot reverse a servo with this product. You CAN reverse the direction that the travels either fast or slow. ie: slow extend the landing gear and pull the gear back into the fuselage. 2. slow extend and retract 3. fast extend and a slow return to the fuselage. BUT NO SERVO DIRECTION REVERSE
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Such a clever little device. I run two transmitters in master-slave, but only one of them supports programming of flaps speed. This gadget allowed me to do the slow-down (even with separate speeds deploying and retracting) and also one of the three servo outputs is inverted, so I could remove a Y cable and the servo inverter I used previously, and I got my nice scale slow flaps, regardless of which transmitter is the master. And it only weighs 2.7gr! Really recommended, can't imagine how an improved product would be! You do need a male-male servo cable (some customers have said female-female but that is WRONG). It's this cable type you need to get (length according to your needs): 258000012. Cheers!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed these into a Hobbyzone Super Cub, a Parkzone Corsair and a Parkzone P47 Thunderbolt. They give a more realistic flight and are easy to use.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • http://youtu.be/coIhxt_WRUw

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').