Turnigy batteries are known the world over for performance, reliability and price. It’s no surprise to us that Turnigy Lipoly packs are the go-to pack for those in the know. Turnigy batteries deliver the full rated capacity at a price everyone can afford.
Turnigy batteries are equipped with heavy duty discharge leads to minimise resistance and sustain high current loads. Turnigy batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Turnigy Lipoly batteries packs are assembled using IR matched cells.
You won’t find a better deal in Lipoly batteries anywhere!
Minimum Capacity: 3000mAh
Configuration: 6S1P / 22.2v / 6Cell
Constant Discharge: 35C
Peak Discharge (10sec): 45C
Pack Weight: 514g
Pack Size: 139 x 43 x 39mm
Charge Plug: JST-XH
Discharge plug: 4mm Bullet-connector
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Overall pretty happy with the batteries. Flies a Habu 2 with wemotec evo and het2w27. Seems to hold even cells for now. Time will tell. Had one show up with a defective cell. Hobbyking stepped up and replaced if for me with little effort from me. Thanks HobbykingBought this pack from HK USA. One cell was defective, thus I am completely unable to use this battery pack. I hope HK customer service works as well as I have heard.Super power Batterien und ideal fr den 6HV Compass Heli & T-Rex 500. Absolut zu empfehlen fr den Preis!!Awsome battery for the trex 500!! 7 min flight time on the 500 typhoon motor w/ a 12 tooth pinion ...flying ttUse two of these in series to power 13 pound Giles. Will fly 19 inch prop and provide plenty of power.I use these lipo's in a t-rex 500ESP, and fit perfectly with the lowered frame & a fusuno ex canopy. Arrived perfectly balanced & still have plenty of power a number of cycles later. Will be buying more!!Excellent battery for my Rex 500. Over 10min hovering time on a 14 tooth pinion with a CC Ice 75 in governer on 2300 headspeed. Bought a second one.One hint in between:
after the first charge, I have spent , that from 2 of 6 LiPo's one cell was a little bit out of sync with the other ones (~0.25V). On one Lipo the charger was interrupted with an error message: Here one cell was all time during balancing 0.2V under the other cells ( 4.2V) Suddenly the cell (4.0V) was jumping over the limit, so that the Charge cut the charge with an error message. Also the dicharge would not be start. I have start the discahrge for 15 min. without the balancer and connect the balancer after this time.
After discharge the LiPo's to 3.6V min. per cell, pls use the store Menu. In this case the LiPo will be only charged to 60. Here it's need a time to balance every cell. If this one is finish, continuous to charge the LiPo to 100 and all things are fine :)
This battery fits perfectly in my Trex 500 esp. After 5 flights or so it really came alive. Providing 5 min of flight time,with Hyperion 1600kv motor and 13t pinion. Balances very well and a good strong battery.I have buy 6 of them for the T-Rex500. There is enough place for this LiPo (with the new LipoHolder in the ESP-Version.
Also it is better for the LiPo, if the "C" is bigger (e.g. 3300mAh 30C = const. Ampere 99A this one has 3000mAh but 35C = const 105A)
The power-balance is after the first charging, discharged to 3,6V per Cell and reload to Store-Voltage nice balance between each cell. I charge the LiPo with 0,75 C and discharge them with ~2,1A. It is interesting how much the total capacity is: the charger shows as 60 (Store-Voltage) a little bit over 2800mAh(!) which was filled in. The normal LiPo-Checker shows 70.
About this values ( 5mOhm and less in depend of LiPo) I believe, that after formating the LiPo (5 times charge and discharge) the LiPo will be make a long time a nice job. I'll report later, after ~20 cycle, how the LiPo will be.
One negative point is: the LiPo's are delivered as default with a HXT connection. In Europe each HXT connector, which you can buy, is a little bit to small from the chassis. The packet with the connector is now 3 weeks on the way from HK to Germany (normal post :( :( :( ) so I have disconnect all of them and soldering 4mm Goldie's to the LiPo. Unfortunately this LiPo-seize (also Flightmax ) has as default NOT a 4mm or 5,5mm Goldie's so like the T5000.6S.30. It will be much better.