New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy 4208 620kv Brushless Multi-Rotor Motor

Turnigy 4208 620kv Brushless Multi-Rotor Motor

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
SKU:
922000015
WANT FREE SHIPPING? Click here to find out more!

If you're serious about your multi-rotor's performance, look no further than this Turnigy mult-rotor motor. Built with high-end 45SH magnets, a high pole count, custom motor mount and extra long wires, this motor is designed purely for multi-rotor applications.

This motor includes a collet style prop adaptor for use with many different style props featuring a 5mm shaft. It also includes a bolt-on cross mount for quick and easy installation on your quadcopter frame.

This is not a modified airplane outrunner. It was designed from the ground up specifically for multi-rotor applications.

Specs:
Kv: 620rpm/v
Can size: 45mm
Shaft: 3.17mm (includes prop adapter for 5mm prop mounting)
Motor Mount Holes: 16mm / 19mm
Suggested ESC: 30A
Rated Watts: 180W
Weight: 79g
Cell count: 3~4S Lipoly
Motor wire length: 390mm

  • SKU 922000015
  • Brand Turnigy
  • Hmotnost 144.0000
  • Délka 110.00
  • Packaging Width 40.00
  • Výška 75.00
  • Kv (rpm / v) 620.00
  • Maximální proudy (A) 30.00
  • Odpor ( mh) 129.00
  • Maximální napětí ( V) 15.00
  • Výkon ( W ) 180.00
  • Hřídel A ( mm ) 3.18
  • Délka B ( mm ) 21.00
  • Průměr C ( mm ) 42.00
  • Může Délka D ( mm ) 8.00
  • Celková délka E ( mm ) 32.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 5 of these for a big H-quad project. Paired them with hobbywing 40A ESC's(Its what I had lying around). I did not use the supplied prop holder. Replaced the with prop holders that screws onto the shaft with a clamp screw. I use 12x4.5SF props on 4S battery. I use an APM flight controller and get around 12 to 15minutes flight time. I like the motors. They seem well made and balanced. Good enough for my application. The supplied prop adaptors suck, but the motor runs great. Thanks guys, great value for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 5 of these for a big H-quad project. Paired them with hobbywing 40A ESC's(Its what I had lying around). I did not use the supplied prop holder. Replaced the with prop holders that screws onto the shaft with a clamp screw. I use 12x4.5SF props on 4S battery. I use an APM flight controller and get around 12 to 15minutes flight time. I like the motors. They seem well made and balanced. Good enough for my application. The supplied prop adaptors suck, but the motor runs great. Thanks guys, great value for the price.

Figured out the same issue as mentioned in the previous review. The prop holder is not very good designed. When testing the motor the prop went to the ceiling and broke.

Recommendation is to use loctite to glue the adapter to the shaft.

The price of the motor seems reasonable.

Also I figured out timing issues with the plush 30A controller using fast/medium/slow timing. In low speed the motor is stuttering in every timing mode of the controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Figured out the same issue as mentioned in the previous review. The prop holder is not very good designed. When testing the motor the prop went to the ceiling and broke.

Recommendation is to use loctite to glue the adapter to the shaft.

The price of the motor seems reasonable.

Also I figured out timing issues with the plush 30A controller using fast/medium/slow timing. In low speed the motor is stuttering in every timing mode of the controller.

Bought 4 of these motors to build quad with AQ600 frame.
Runs ok but one thing I would like to comment is about the included prop holder.
The holder does not hold the prop tight enough so that the prop turn a little bit. Also I noticed that the holder is not centered to the shaft of the motor. I see some vibration due to un-centered prop holder.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these motors to build quad with AQ600 frame.
Runs ok but one thing I would like to comment is about the included prop holder.
The holder does not hold the prop tight enough so that the prop turn a little bit. Also I noticed that the holder is not centered to the shaft of the motor. I see some vibration due to un-centered prop holder.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!