The Turnigy TQ4 4x6S can charge four batteries packs simultaneously!
A quality designed charger with accurate balancing and a familiar, intuitive menu system.The Turnigy 4x6 is equipped with 4 high accuracy microprocessors to charge each battery individually. Its efficient cooling system ensures safe operation throughout the charge cycle.With the Turnigy 4x6 you are able to balance charge a lipoly pack on Port-1 while series charging a LiFePo4 or NiMH battery on Port-2. All ports work independently of each other.
Specification:Operating voltage range: DC 11~15VPower source: 12V DC (car battery) / AC mains PSU (>200Watts)Cell count : 1-15 Ni-xx / 1-6 Li-xx / 1-10 Lead acid cells (2~20V)Current drain for balancing li-xx: 335mACharge termination Ni-xx: Automatic, negative Delta Peak methodCharge termination Lead acid & Li-xx: Automatic, voltage dependent, CC-CV process
Maximum Charge Current per port: 6A
High velocity heatsink exhaust fan.
Including;1 x TQ4 charger1 x JST XH Adapter1 x TP/FP Adapter1 x Banana plug w/ Male Tamiya1 x Banana plug w/ Female Mini JST1 x Banana plug w/ Female Futaba1 x Banana plug w/ Alligator clip1 x Banana plug w/ No connector1 pair Alligator clip
Note: Power supply not included.
All accessories shown in image are included.
Hmotnost ( g )
Charger is OK. Ports should be indicated better (ie Port 2 is top left, Port 1 is top right).
LiPo storage mode can unfortunately only be programmed to max 1A charge rate - kind of annoying. Accucel did it much better. So you'll have to either do a charge yourself and stop manually when you get close to 3.85V, or just charge at 1A.Really impressed! It's a great value for the price, and everything looks very clean and well designed. Make sure to read instructions thoroughly.DISCHARGE FUNCTION IS DANGEROUS AND STEAL YOUR MONEY. Discharge is only 0.3A, I'm agree and voltage terminaison is 3.0v per cell !!! Impossible to change this that distroy your battery for sure. Is someone at hobbyking test this charger ? I believe not. Scandalous to sell a charger that distroy your battery. (in discharge function) and charge function is to high > 4.2 per cell aka 4.22-4.24v per cellAn absolutely brilliant & convenient charger to have as part of your Rc Hobby set up,, 4 independent charging channels, simply plug in your batteries e they Lipo Nicad NIMH or LiFe this charger is easy to set up and use is reliable and amazingly good value..Very happy with this charger. I can charge, balance etc. 4 6s batteries in parallel. Since I only use 6s up to 1300 mah that is a powerful combination and the 50W per output channel are more then enough. Also the same batteries I could not get balanced using a similar sized brand name charger balance quickly and very well (less then 0.010 difference) using this charger. All in all if you run several 450 size helicopter on 6s this is the charger for you IMO! Eventually when bigger helicopters come along which I also plan to run on 6s (I don't fly 3D), I will augment this charger with a bigger one providing more Watts per channel but still plan to use this one for the smaller batteries.super ladegert,bin sehr zufrieden.Vielen dank fr die schnelle Lieferung,macht weiter so!!!!!!!!!!!!Excellent (noisy) charger! Great stuff for such money. Each channel operates completely independently. You can set 6A max per channel. - need serious power supply and cooling if using maximum current. In my case it charging 4,5A max despite 6A set (20A 12V supply used). Very nice LiXX future resistance test.
Only single cables included - remember to buy extra cables e.g.: PRODUCT ID: Quattro-EH and ID: 5.5MM-CHR or something as you needs.
p.s. - Dennis - the manual available at Files tab section at this page :)
My charger was/is noisey but much better. I removed the cover, 5 screws, 4 on botton, 1 on side. The fan is held in place, in bracket. There are 2 screws on top of bracket, lift fan up and it comes right out.(no need to remove any boards) I wiped the fan blades with a cloth, and the bracket, grills in side of charger. Put fan back in, replaced cover and quite a bit of improvement.Very pleased with mine, one exception, the very noisy fan. Am using to charge 4 2299mah batteries, and later to STOR . Have had no problems with charge/balancing 4 at time. Sure beats single channel charge. For inexpensive charger it is very good (dont know how much better a expensive one could do)recommend it!no memory for the charging mode when restarted
and very noise from the fan.
Good value and save for charging time except above.
Manual download now [3735kb] TQ4 - Manual download now [1577kb] TQ4 Manual Deutsch download now [830kb] charger manual download now [1577kb] charger manual download now [1577kb] No File Name download now [1866kb] Turnigy TQ4 4x6S.pdf download now [1577kb] 21132699X1535115X27.pdf download now [1866kb] MANUAL download now [1.51Mb]