An advanced and powerful charger, the Turnigy A6-10 is able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries on a maximum output power of 200W. It can charge or discharge up to 18 cells of NiCd / NiMH and 6 series of lithium batteries with maximum current of 10A. It can accept three types of Lithium batteries (Lilo/Lipo/LiFe).
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
Large range of charge currents
Store function, allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store up to 5 packs in memory)
Battery break in and cycling.
Input Voltage: 10~18v
Circuit power: Max Charge: 200W / Max Discharge: 25W
Charge Current Range: .1~10.0A
Discharge current range: .1~5.0A
Ni-MH/NiCd cells: 1~18
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~24v
Dimensions: 143x124x37mmCompatible with all Zippy, Rhino and Turnigy packs.
Hmotnost ( g )
lies in the product description. USB connector on the charger is not available.
The charger does not start from the power supply 12v 5a
I was able to run only on battery car battery. At the moment when a large current consumption occurs 5-6a. Can not be applied low-power power supplies.Bought two Turnigy A6-10- 200W, Congratulations HK, two chargers from different batch numbers (one with a blue screen with white digits and the other with black digits) and both need no calibration. Accurate charging, accurate balance charge, discharge for storage no problem. Its a real workhorse, fan is a little noisy but the thermal picture very good. Conclusion unbelievable value for your money.Lots of features, but unable to balance my lipos with less then 0.2 volts difference. Some times my 2S lipos end up 4.34 - 4.06.
You can possibly destroy your lipos by overcharge in the charger or by over-discharge in use because of the realy bad balance.
Avoid this one!Excellent charger, even though mine doesn't have the USB port/outlet, who cares!!! For the price, quality is excellent, the charger also comes with the leads to charge NiCd/NiMh Rx battery packs for the nitro fliers/drivers. Mine was already calibrated for LiPo batteries so it was ready to use. Also has a 'storage' setting for LiPo batteries. If I could give it more stars, I would, keep it up Turnigy!!!One of the decision i made, use it for parallel charging my LIPOs - Balance perfect (checked with multimeter)Easy to use, connectors all good quality. Ive had mine over a year now without heavy use but has had some and always working. Annoying alarm lol it can be turned off. Great value.Lasted 3 charges and then resistor R117 fried, now the storage and discharge function have stopped working
Superior quality. Easy handling. Recommend.Its well built, and comes with cables, its powerful enough for me.
But the balance gives me 4.2V in first cell and 4.3V in second cell. even tough it shows 4.2V for both. 0.01V to 0.03 volts would be acceptable. 0.1V is to much error for lipo battery.
Using it like this may make damage my lipos earlier or even set them on fire, overcharging it.
To bad a mistake on the firmware, the hardware looks good. If its possible to calibrate all the voltage for all leads, it would be great!
Another bad point is that the manual has USB on it and the actual charger does not.
Dont recommend look for something else.Hallo,
leider ist die Funktion des Balancers nicht zu gebrauchen.
because of the dis-function of the balancing devices the loader can't be used