The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.
Output: Continuous 20A, burst 25A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 50mm (L) * 26mm (W) * 12mm (H).
High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
Wide-open heatsink design to get the best heat dissipation effect.
Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
Smooth, linear, quick and precise throttle response.
Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
Programable via transmitter
Brake setting (we recommend using brake for only folding props applications)
Battery type(Li-xx or Ni-xx)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox applications)
Low voltage cutoff type (power reduction orirnmediate shutdown)
Factory default settings:
Battery type: Li-xx (Li-ion or Li-Po)
Low voltage cutoff threshold: Soft cut-off (2.6V)
Timing setup: Low
Soft Acceleration Start Up: Normal
Low voltage cutoff type: Medium
*Please see "Files" tab for ESC manual w/programming instructions
Hmotnost ( g )
i like that it was smallIt would be nice if cables can be colour codedGood price and quality. Perfekt for ESA AircombatBought this ESC for a Bixler2 build...
Turns out that the 2A BEC can't even power two tiny servos.Acheter en solde pour seulement $6.74.
Non test pour l'instant mais ESC de bonne facture.
La carte de programmation Turnigy PLUSH blanche ne fonctionne pas avec ce contrleur, mais la programmation par dfaut est satisfaisante pour moi.Nice looking and lightweight 20 amp ESC. Great for when you want to mount the ESC externally.very cheap ESC. quality is okay.. no fancy programing gizmos, but still cant complain for it's low pricehk 250 heli with Good ESCBought four of them for my quad. After second flight one esc died. The current wasn't higher than 8 A. Very disappointing.I bought (4) of these ESC's after having great luck with their 45A counterparts. I have some 30" balsa biplanes that these were installed in and none of them were useable. They all spunt the motors just fine, but the BEC would only power 2 servo's, add in a 3rd or 4th servo and it causes all of the servo's to go nuts and fly to extreme endpoints or beyond. I have never seen anything like it! I don't know if the 25A versions suffer from the same fate, but this is one purchase I regret. :( I will be saving these for wings and bank and yank aircraft with only 2 servos or else consider an external BEC.
HK manual TAE ESC download now [109kb] japanese download now [20kb] Theunsie s setup manual better explaine download now [4kb] Programmation SÃ©rie AE en FranÃ§ais download now [216kb] AE Manual download now [109kb] AE Manual 2 download now [945kb]