Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a qualitymotor without compromise.
Internal resistance: 0.185 Ohm
Max Loading: 8A
Max Power: 95W
Shaft Dia: 3.0mm
Motor Plug: 3.5mm Bullet Connector
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Pretty efficient with 8x4.5SF props. lifts a f330 frame with fpv gear no problem.Sk3 serie's motor are awesome.... you can buy it with your eyes closed.
they come in a nice box with everything in itVery powerful and works great on my tricopterProduct of excellent quality. Well packed.Quadcopter with plush12A, 8x4.5, 1300mAh, 480g flyweigth
They are not very robust but very economic and amazing quickly.
Dont hit the ground and they will be great!Nanowii, 8x4.5, 3S-1300mAh, Plush 12A, 480g flyweight
amazing, the quad is extrem quickly.
They are very economize but not tough.
So, dont hit the ground and they will be great.
Good little motors, nice packing! I have ordered 4, one of them does not spin as smooth but is okay. I am using them with 8x4 props and 3s lipo. They are warm after 10 minutes of flight but no hot. Satisfied with them for now. The only drawback is that the motor wires are way too short and very thin! A few cm plus and a bit more thick wires and they would be perfect. In overall, satisfied.Nice motor. Purchased one 1275KV (this) and a few 1090KVs. One of the 1090 was defective, but this 1275 runs very well. Tested with Flukemeter and 8x4.5 prop: 4.2A at 8.0V (2S Lipo) and 6.8A at 11.5V (3S LiPo).
Recommended, but be prepared for the odd defect.Great little motor. brought three for a tricopter. Running 9x5 and 8x4 props (either works OK, 9x5 more stable, 8x4 more responsive.)
30 amp speedie (bit of overkill) and 3000 mAh 3S lipo(turnigy)