New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy Aerodrive SK3 - 3548-840kv Brushless Outrunner Motor

Turnigy Aerodrive SK3 - 3548-840kv Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

33,99 €
Stav:
Skladem
SKU:
SK3-3548-840
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today. The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time. The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.

Specs.
Turns: 10T
Voltage: 3~4S Lipoly
RPM/V: 840kv
Internal resistance: 0.025Ohm
Max Loading: 50A
Max Power: 750W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Weight: 174g
Motor Connectors: 3.5mm Bullet Connector

  • SKU SK3-3548-840
  • Brand SK3
  • Hmotnost 288.0000
  • Délka 110.00
  • Packaging Width 45.00
  • Výška 80.00
  • Kv (rpm / v) 840.00
  • Maximální proudy (A) 50.00
  • Odpor ( mh) 25.00
  • Maximální napětí ( V) 15.00
  • Výkon ( W ) 750.00
  • Hřídel A ( mm ) 5.00
  • Délka B ( mm ) 49.00
  • Průměr C ( mm ) 37.00
  • Může Délka D ( mm ) 28.00
  • Celková délka E ( mm ) 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

super monter puissant et pas trop gourmand en ?nergie monter sur une aile fx 61 avec h?lice repliable 11x8 pour de long vole FPV

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super monter puissant et pas trop gourmand en ?nergie monter sur une aile fx 61 avec h?lice repliable 11x8 pour de long vole FPV

Fliege diesen Motor in meiner MX2 Green 3D 1400mm mit 12X6 APC Style

Das Flugzeug steigt senkrecht, ich bin sehr zufrieden mit dem Motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fliege diesen Motor in meiner MX2 Green 3D 1400mm mit 12X6 APC Style

Das Flugzeug steigt senkrecht, ich bin sehr zufrieden mit dem Motor

Excellent motor! Used this in my 48" Extra 330sc and it performs very well. Tested using 12x6, 13x6.5 and 14x7 wooden props and they all give strong thrust & power to perform 3D acrobatics, though 14x7 gives strongest power.

Also the motor is surprisingly quiet and doesn't make alot of noise which is very nice.

Overall a great motor, highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent motor! Used this in my 48" Extra 330sc and it performs very well. Tested using 12x6, 13x6.5 and 14x7 wooden props and they all give strong thrust & power to perform 3D acrobatics, though 14x7 gives strongest power.

Also the motor is surprisingly quiet and doesn't make alot of noise which is very nice.

Overall a great motor, highly recommended.

Mounted on a plane HobbyKing MXS EPP / Light 3D Plywood 14x7E prop, the ESC must be 70 amps; flying at a height of 2,300 meters above sea level using a battery of 2,200ma 4s 40c.It provides six minutes of flight combined 3D and pattern.
Incredible engine power and barely heats, coprare more! Youtub: PT_kTyeoHNU

Montado en un avion HobbyKing MXS EPP/Light Plywood 3D con helice 14x7E, el ESC debe de ser de 70 ampers; volando a una altura de 2,300 metros sobre el nivel del mar y usando una bateria de 4s 2,200ma de 40c. proporciona 6 minutos de vuelo combinado de 3D y patron.
Increible potencia y el motor apenas se calienta, coprare ms! Youtub: PT_kTyeoHNU

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mounted on a plane HobbyKing MXS EPP / Light 3D Plywood 14x7E prop, the ESC must be 70 amps; flying at a height of 2,300 meters above sea level using a battery of 2,200ma 4s 40c.It provides six minutes of flight combined 3D and pattern.
Incredible engine power and barely heats, coprare more! Youtub: PT_kTyeoHNU

Montado en un avion HobbyKing MXS EPP/Light Plywood 3D con helice 14x7E, el ESC debe de ser de 70 ampers; volando a una altura de 2,300 metros sobre el nivel del mar y usando una bateria de 4s 2,200ma de 40c. proporciona 6 minutos de vuelo combinado de 3D y patron.
Increible potencia y el motor apenas se calienta, coprare ms! Youtub: PT_kTyeoHNU

4 flights so far on my PA XR52. Using a Vox 13x5 prop with a 4S battery the power is great. The previous hyperi*n motor couldnt handle all the knife edge spins and was getting a bit rough, so will need to see how this one holds up. Nice and smooth motor, and seems pretty solid so hopefully it is up to some hard 3D flying!.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

4 flights so far on my PA XR52. Using a Vox 13x5 prop with a 4S battery the power is great. The previous hyperi*n motor couldnt handle all the knife edge spins and was getting a bit rough, so will need to see how this one holds up. Nice and smooth motor, and seems pretty solid so hopefully it is up to some hard 3D flying!.

One of the front bearings has gone from slightly rumbly when purchased, to rather noisy after only 2 flights. Other than that, its been a good motor so far with great power and a nice finish. Good value for money but the bearing issue stops it being a 5 crown product for me.

Bell was nicely balanced, the prop adaptor is well centered and everything fits great.
Drawing 40A peak with a 12x7 master airscrew prop on 4s.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

One of the front bearings has gone from slightly rumbly when purchased, to rather noisy after only 2 flights. Other than that, its been a good motor so far with great power and a nice finish. Good value for money but the bearing issue stops it being a 5 crown product for me.

Bell was nicely balanced, the prop adaptor is well centered and everything fits great.
Drawing 40A peak with a 12x7 master airscrew prop on 4s.

Mounted with a 12x6 folding prop an 4s configuration is great power for a go discover or a similar class airplane. Ps: I mounted in a Go discover, but I had to modify the inner space of the plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mounted with a 12x6 folding prop an 4s configuration is great power for a go discover or a similar class airplane. Ps: I mounted in a Go discover, but I had to modify the inner space of the plane.

I have more SK-series motors in unse and they work very good. No issues so far. Recommended product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have more SK-series motors in unse and they work very good. No issues so far. Recommended product.

Always bench test electric rc motors, without a prop, first thing I noticed, the rear of the motor warms up, fast, it does accel and decel smooth. Installing it Running a 4 cell, 2600 lipo, 50 amp ESC, 11 x 6 Masterscrew prop. stats are 47 - 48 amp, 565 watts full throttle, pulling 4.7 - 5.1 pounds. Should be good for my 3.5 pound foamy sbach, seeing how I am not a 3D guy ( yet ), just like to do the rolls, inverts, crazy 180's.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Always bench test electric rc motors, without a prop, first thing I noticed, the rear of the motor warms up, fast, it does accel and decel smooth. Installing it Running a 4 cell, 2600 lipo, 50 amp ESC, 11 x 6 Masterscrew prop. stats are 47 - 48 amp, 565 watts full throttle, pulling 4.7 - 5.1 pounds. Should be good for my 3.5 pound foamy sbach, seeing how I am not a 3D guy ( yet ), just like to do the rolls, inverts, crazy 180's.

Ich habe diesen Motor mit einem 70A Brick in einem Talon verbaut. 12" Prop mit 2x4s 5000mAh.
Funktioniert einwandfrei. Werde aber noch zustzlich ffnungen fr Frischluft schaffen, damit der Regler besser gekhlt wird. Top Motor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe diesen Motor mit einem 70A Brick in einem Talon verbaut. 12" Prop mit 2x4s 5000mAh.
Funktioniert einwandfrei. Werde aber noch zustzlich ffnungen fr Frischluft schaffen, damit der Regler besser gekhlt wird. Top Motor!

  1. 1
  2. 2
  3. 3
Customer files
SK3-3548(DT3025-14P) MOTOR (edited).pdf Download [128]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save