The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!
Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else! It even features a billet aluminum water cooling jacket pre-installed.
The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!
• CNC machined billet T6 aluminum motor can
• High purity copper windings
• 4mm bullet connectors pre-installed
• Powerful sintered neodymium magnet
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
Great Motor and a Great Price. Ordered 4 shipped DHL to US from Hong Kong good shipping price. Received in 3 days. Bench Test all 4 found one sounded funny so I RMA it on 9.3.2016 received Refund quickly 9.7.2016 received new motor. New Motor Tested Good. I will post video of Youtube of Dual Brushless 40 inch Cat Boat Shortly. Always Video and audio tape your Test. Then you can post it to youtube for RMA. Than you in most cases avoid return shipping.Hi there,
I've used it for 20 secs with a 4s accu and the axle stucked. It doesn't work anymore....acheter pas ce moteur........la description parle d'une capaciter de 6s, je l'ai installer dans un proboat impulse 31 avec un esc hobby king 90A boat ESC 4A SBEC et une lipo 4S 3000 20c. (batterie un peu petite juste pour le test) apres seulement une a deux minutes le moteur a flamber............j'ai essayer de communiquer avec le service apres vente....ha ha ha bonne chance j'ai jamais eu de nouvelles. $50 US partie en fumer......merci HKGood motor, 95A with 45mm prop 2 blades and 60mm pitch.
3S 4 X 2200mah nanotech, Esc hobbyking boat 90A
My homemade 1.53 meter wooden boat loves it and me too !Burnt mine just by testing it on the table with 6s battery. After about 2 seconds, some smoke appeared. After opening it, the cage was not smooth, the rotor got damaged by these imperfections.
These motors are great , I dont know what you guys are doing wrong but I have three of these and NO Problems . Judging from what I'm reading I dont think you guys are surface runnig your props or your over propping your rigs . My boats are running from 38-44 mph and cool with about 40 min running time . These motors are about 5 mph faster than the 1460 . I use 4s batts with 120 amp esc's with X445 props SURFACE RUNNING. 2 motors in a 40 inch 12.5 lb boat and one motor in a 30 inch 6 lb boat . A on motors and esc'sBoat Caught FIRE
Motor run fine on a 55mm 1.4 pitch propeller and on low 30Km h speeds on 3 Kg boat. Once pushing the throttle one of the motor connectors baked. If this motor is really rated at 1.6KW then a 4mm bullet connector is at the amperage limit .This motor needs 5 mm bullet connectors. Once new connectors were installed not a problem.
again trying to save pennies and mototr burns. NOT VALUE FOR MONEYI burned mine running a 6s on a genesis....prop was a 40mmx1.4, wasn't able to run for more than 30seconds