Turnigy Bolt series high voltage lithium polymer batteries are here, ready to bring out the next level of power to your high performance model. Turnigy Bolt batteries are built to the absolute highest of standards to provide competition level performance. With features such as gold plated balance leads, silver plated discharge wires and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!
In addition to the higher nominal and max voltage, they are engineered to take high C rate discharge up to 65C continuous. Basically what this means is that these batteries will provide more power in your machine especially during high current draw maneuvers, and they will provide a longer cycle life due to the lower operating temperatures of the pack.
Top notch performance and build quality make these packs ideal for high-demand flying such as 3D helicopters,s, F3A and any other high current draw applications. Each pack is built with heavy duty flexible silicone wire leads and a pre-installed connector ready to handle all you can throw at it. The great thing about the Turnigy Bolt batteries is that you can charge them with any standard lipo charger for basic use, they will simply perform like a standard pack. When using the proper charger such as our Turnigy Neutron chargers, which is designed with special protocol for these LiHV batteries, you can unlock the full potential of the Turnigy Bolt batteries.
More than just a fancy name.Bolt series lithium polymer batteries are built with a LiCo nano-technology substrate complex and an all new CNT (carbon nano tube) additive greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
LiHV stands for “High Voltage Lithium Polymer”. These batteries have been around for years and can be safely charged to 4.35V, higher than the typical voltage of Lipos.
The advantages of LiHV batteries are the higher power and longer running times. LiHV batteries can be charged to 4.35V per cell, higher than normal LiPo batteries which sit at 4.20V. For example, a 4S LiHV pack charged at 4.35V would give you 17.4V. Whereas a Lipo battery on the same charge would only get 16.8V. LiHV batteries also have a lower internal resistance and are less prone to "puffing".
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured,are the real deal, delivering unparalleled performance!
• Higher charge voltage than standard lipos
• Super high 65C discharge rate
• Perfect for high performance models
• Higher capacity than comparable size packs
• Heavy duty silicone wire discharge leads
Voltage: 4S1P / 4 Cell / 15.2V
Discharge: 65C Constant / 130C Burst
Weight: 248.3g (including wire, plug & case)
Discharge Plug: XT60 Bullet Connector
Wire Gauge: 12AWG
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Loads of amps. ESC s bewareI have three of these batteries. I use them in the new HK P40. After light use only and 1amp charging one of them is becoming puffy. Not a good sign as these are not cheap batteries. They do work well and yes I bought the correct charger from HK for this battery to enable charging to a higher voltage. Only used them a few times so time will tell how well they last.This is the best battery I ever use!
Extreme high voltage at a high current.
I use it in my Durafly EFX Racer with a NTM Prop drive 35-36A 1800KV and a APC 7x8 pylon prop. Current is round about 100A. The power expansion is incredible. Buy it!Wow, these Batteries are really powerfull. Lots of amps drawing and still good voltage and better performance cvompared to 30 or 40C on EDf an Inrunner motors. Highly recommended productMit diesen Akkus wird mein Invertix so richtig schnell.
Super Akkus mit sehr geringem Innenwiderstand. Kann ich nur empfehlen!
My Invertix is going extremely fast with this Battery.
Super Battery with very low internal resistance. I can only recommend them.
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,115,0" id="i_fda462d6b2c84eb3b686609ca458b60f" width="480" height="270">
<param name="movie" value="http://applications.fliqz.com/b7c429db56d444cab266f1a311d9e524.swf"/>
<param name="allowfullscreen" value="true"/>
<param name="menu" value="false"/>
<param name="bgcolor" value="#000000"/>
<param name="allowscriptaccess" value="always"/>
<param name="flashvars" value="at=7a0a6d29f48346838296a097deea7e62&permalink=http://www.hobbyking.com/hobbyking/store/uh_customerUtilitiesMenu.asp"/>
<embed name="i_ebac7b4331c546d1998abbb2e46b95a5" src="http://applications.fliqz.com/b7c429db56d444cab266f1a311d9e524.swf" flashvars="at=7a0a6d29f48346838296a097deea7e62&permalink=http://www.hobbyking.com/hobbyking/store/uh_customerUtilitiesMenu.asp" width="480" height="270" pluginspage="http://www.macromedia.com/go/getflashplayer" allowfullscreen="true" menu="false" bgcolor="#000000" allowscriptaccess="always" type="application/x-shockwave-flash"/>
</object>Gewicht 256g inkl. 12cm 12AWG-Kabel mit XT60-Stecker mit Isolierung und 6,5cm Balancerkabel mit Stecker
Abmessungen 114 x 35 x 33mm
Innenwiederstand bei Raumtemperatur und Lagerspannung 0,04 0,05 0,05 0,05 milli OhmSupper Accu, Hat Druck und ist trotzdem recht leicht. Giebt bei 4,35V pro Zelle 2450 mah ab und bei 4,2V pro Zelle 2080 mah ab. Er ist mit XT60 Stecker und 10 cm AWG 12 Kabel 254 Gramm schwer.