Turnigy Bolt series high voltage lithium polymer batteries are here, ready to bring out the next level of power to your high performance model. Turnigy Bolt batteries are built to the absolute highest of standards to provide competition level performance. With features such as gold plated balance leads, silver plated discharge wires and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!
In addition to the higher nominal and max voltage, they are engineered to take high C rate discharge up to 65C continuous. Basically what this means is that these batteries will provide more power in your machine especially during high current draw maneuvers, and they will provide a longer cycle life due to the lower operating temperatures of the pack.
Top notch performance and build quality make these packs ideal for high-demand flying such as 3D helicopters, EDFs, F3A and any other high current draw applications. Each pack is built with heavy duty flexible silicone wire leads and a pre-installed connector ready to handle all you can throw at it. The great thing about the Turnigy Bolt batteries is that you can charge them with any standard lipo charger for basic use, they will simply perform like a standard pack. When using the proper charger such as our Turnigy Neutron chargers, which is designed with special protocol for these LiHV batteries, you can unlock the full potential of the Turnigy Bolt batteries.
More than just a fancy name. TURNIGY Bolt series lithium polymer batteries are built with a LiCo nano-technology substrate complex and an all new CNT (carbon nano tube) additive greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
LiHV stands for “High Voltage Lithium Polymer”. These batteries have been around for years and can be safely charged to 4.35V, higher than the typical voltage of Lipos.
The advantages of LiHV batteries are the higher power and longer running times. LiHV batteries can be charged to 4.35V per cell, higher than normal LiPo batteries which sit at 4.20V. For example, a 4S LiHV pack charged at 4.35V would give you 17.4V. Whereas a Lipo battery on the same charge would only get 16.8V. LiHV batteries also have a lower internal resistance and are less prone to "puffing".
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, Turnigy Bolt series LiHV packs are the real deal, delivering unparalleled performance!
• Higher charge voltage than standard lipos
• Super high 65C discharge rate
• Perfect for high performance models
• Higher capacity than comparable size packs
• Heavy duty silicone wire discharge leads
Voltage: 3S / 3 Cell / 11.4V
Discharge: 65C Constant / 130C Burst
Balance Plug: JST-XH
Discharge Plug: JST Connector
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
I use these for my 3" 210g quadcopter. I can get 3-4 minute flight time and I don't get any voltage drops because the quad only uses 8A (15A peak current) during race. The motors are emax 1306 3300KV and I use 3045BN props.
I would give them 5/5 if they had XT30 connectors by default.45 g 15x30x51 mm 20AWG wire on discharge 22 AWG on the balance side.These little beasts are fantastic. They discharge fast enough to spin 4 3020 props on 1104 4000v motors without significant sagging. I'd recommend you get 'em while they last!be aware of this batteries......a lot of bla bla bla. using for long nanotech in my 180 cfx I put this on the heli and almost crash two times.... they cant handle the power, looks like they are crappy lipos with new cover.excellent pack, lot of power. Use it on a 130mm quadcopter. Really good performance. I soldered XT30 for better A.