New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy D3536/5 1450KV Brushless Outrunner Motor

Turnigy D3536/5 1450KV Brushless Outrunner Motor

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

17,64 €
Stav:
Skladem
SKU:
D3536-51450
WANT FREE SHIPPING? Click here to find out more!
Turnigy D3536/5 1450KV Brushless Outrunner Motor


Specs:
Battery: 2~4 Cell /7.4~14.8V
RPM: 1450kv
Max current: 45A
No load current: 3.5A
Max power: 655W
Internal resistance: 0.023 ohm
Weight: 102g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x36m
Prop size: 7.4V/9x6 14.8V/8x4
Max thrust: 1380g
Pole Count: 12



 
 
  • SKU D3536-51450
  • Brand Turnigy
  • Hmotnost 155.0000
  • Délka 80.00
  • Width 40.00
  • Výška 50.00
  • Kv (rpm / v) 1450.00
  • Maximální proudy (A) 45.00
  • Odpor ( mh) 0.00
  • Maximální napětí ( V) 15.00
  • Výkon ( W ) 655.00
  • Hřídel A ( mm ) 5.00
  • Délka B ( mm ) 36.00
  • Průměr C ( mm ) 35.00
  • Může Délka D ( mm ) 18.00
  • Celková délka E ( mm ) 52.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great motor, great price. Use with 3s and a 12x6 prop or 4s and a 10x6 prop for great performance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, great price. Use with 3s and a 12x6 prop or 4s and a 10x6 prop for great performance

I use this motor in MPX dogfighter with 9*6 folding prop. The speed of the plane is about 120 km/h. Use with HK 50 A ESC (green). AUW 860 g, flight time: minimum 15 minutes!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in MPX dogfighter with 9*6 folding prop. The speed of the plane is about 120 km/h. Use with HK 50 A ESC (green). AUW 860 g, flight time: minimum 15 minutes!

Sehr guter Motor passt perfekt im Skipper XL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr guter Motor passt perfekt im Skipper XL

Quality of motors looks good.
But motor did not start , found all 3 soldering to cold-connectors of very poor quality .
After resoldering , motor runs fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality of motors looks good.
But motor did not start , found all 3 soldering to cold-connectors of very poor quality .
After resoldering , motor runs fine.

Great motor for upgrade to many different 1100 mm wingspan planes. Make sure you also upgrade the ESC...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor for upgrade to many different 1100 mm wingspan planes. Make sure you also upgrade the ESC...

I put two of these in a sky mule and wow POWER is all I can say this thing will match my 60" 3d plane in a clime well I think I didn't actually check but it has unlimited vertical till its out of sight in very little time not actually out of sight but a very small speck of a plane. They came down a little warm I don't know how warm I didn't have a thermostat with me but it wasn't bad on stock propellers. Basicly they are like most brushless motor that i've used before.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put two of these in a sky mule and wow POWER is all I can say this thing will match my 60" 3d plane in a clime well I think I didn't actually check but it has unlimited vertical till its out of sight in very little time not actually out of sight but a very small speck of a plane. They came down a little warm I don't know how warm I didn't have a thermostat with me but it wasn't bad on stock propellers. Basicly they are like most brushless motor that i've used before.

I put this in a RadJett 800 4s 1300mah 45c lipo 35amp esc 7x5 apc prop this setup is incredible unlimited vertical twists the airframe when I run up the mtr not for the novice very nice smooth running mtr no complaints here over 50 flights still like new.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this in a RadJett 800 4s 1300mah 45c lipo 35amp esc 7x5 apc prop this setup is incredible unlimited vertical twists the airframe when I run up the mtr not for the novice very nice smooth running mtr no complaints here over 50 flights still like new.

Motor perfecto para el FPVRaptor v2 y v1, es el perfecto sustituto al de serie.

Muy importante que el eje es de 5mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor perfecto para el FPVRaptor v2 y v1, es el perfecto sustituto al de serie.

Muy importante que el eje es de 5mm.

top quality motor
i use this one in my 1600 mm pusher glider and it is a great motor!works perfect with turnigy plush 60 amp and 8*6 folding prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

top quality motor
i use this one in my 1600 mm pusher glider and it is a great motor!works perfect with turnigy plush 60 amp and 8*6 folding prop

Tested with 3s LiPo, no load.

- current draw 5.2A, (Power 64W)

- 17516RPM (1435kV)

- Shaft had slight vibrations

Conclusion: Not so precise motor, and high current draw can be caused by not good bearings

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tested with 3s LiPo, no load.

- current draw 5.2A, (Power 64W)

- 17516RPM (1435kV)

- Shaft had slight vibrations

Conclusion: Not so precise motor, and high current draw can be caused by not good bearings

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
9x5prop, 60a Esc and a 3s battery Download [894]
9x5prop, 60a Esc and a 3s battery Download [920]
9x5prop, 60a Esc and a 3s battery Download [826]
9x5prop, 60a Esc and a 3s battery Download [1212]
9x5prop, 60a Esc and a 3s battery Download [1492]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!