Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy D3542/6 1000KV Brushless Outrunner Motor

Turnigy D3542/6 1000KV Brushless Outrunner Motor

QTY:

Now save Uložit 0,00 € 0,00 €

16,06 €
Stock:
Váha:
184 g
SKU:
D3542-61000

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Popis
produktu
Turnigy D3542/6 1000KV Brushless Outrunner Motor


Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1000kv
Max current: 38A
No load current: 2.4A
Max power: 665W
Internal resistance: 0.031 ohm
Weight: 130g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x42m
Prop size: 7.4V/11x7 14.8V/10x5
Max thrust: 1260g

 
 
Product
Specifications

Další informace

  • SKU:
    D3542-61000
  • Brand:
    Turnigy
  • Hmotnost ( g )
    184.00
  • Délka
    80.00
  • Width:
    40.00
  • Výška:
    50.00
  • Kv (rpm / v)
    1000.00
  • Maximální proudy (A)
    38.00
  • Výkon ( W ):
    665.00
  • Délka B ( mm ):
    42.00
  • Může Délka D ( mm )
    24.00
  • Maximální napětí ( V)
    15.00
  • Hřídel A ( mm ):
    5.00
  • Unit Weight (g):
    130
  • Průměr C ( mm )
    35.00
  • Celková délka E ( mm )
    58.00
  • Odpor ( mh):
    0.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Bruit désagréable à un régime proche du ralenti, puis bon fonctionnement. probablement un pb de roulements.
Convient bien à un Funcub avec une hélice 13X4 (3s - 410 W , 36A) après avoir retourné l'axe.
Quality
Value
Overall
Quality
Value
Overall
Good motor. I use it on a Super Dimona 2m40. It's perfect with a 11X5,5 Carbon prop and 3S LiPo draws around 33 Amp at full throttle : 367 Watt - 9400 RPM .
Quality
Value
Overall
Quality
Value
Overall
Just put this motor in my PZ Sport Cub and I absolutely love it. On a 4s 45c 2200mah zippy swinging a 10x5 APC it draws 39A at startup and backs off to around 37-38A. I think it's safe to assume in the air average WOT amperage is closer to 35A.

After a short 5 minute flight just gunning it all over the place mostly 3/4 to WOT the motor is cool enough to touch and hold with your fingers(113 degrees F - this is in southeast Louisiana with 100pcnt humidity and close to 95F ambient).

Fits my application perfectly and for being an XP the bearings are not that bad. Definitely a solid motor.
-tayze
Quality
Value
Overall
Quality
Value
Overall
Great motor so far. Balance is very good. Using on a SkyHunter weighing ~2 kg as a pusher on 4s, 11 x 5.5 prop. Draws 45 amps and 650 watts.
Quality
Value
Overall
Quality
Value
Overall
Bought this to install on my Fun Cub.
Flew it on 3S for about 2 years, and was very pleased, untill... I tried on 4S, and a new world was opened to me. The plane sky rockets with unlimited vertical climb until past the clouds!
With this motor the fun cub is capable of carrying 0.5 Kg "bombs", or 3 "paratroopers", a GoPro, or towing a 5 foot banner.
ESC is a Turnigy Plush 60, batteries are now Turnigy 4S 2650 mAh 25C.
Had a few crashes, but it still runs great.
Great motor !
Quality
Value
Overall
Quality
Value
Overall
I put this motor on a thrust test stand I made, using a 45amp esc and an 11x7 3-bladed prop I measured 38A / 410w with 1670 grams of thrust.
It pulls my 1200 gram plane beautifully with awesome vertical.
My buddy has the same motor with a 13x6.5 2-bladed apc prop on a 1400 gram plane and it has almost unlimited vertical.
Quality
Value
Overall
Quality
Value
Overall
Excellent motor, good power to weight ratio!
I've been flying it on a CMS Pilatus P3! About 3.6lbs. and 1500mm wingspan. It likes the 3-blade 10X7 MasterAirscrew and the 11x5.5 2-blade APC; that's on 3S.
GREAT MOTOR!
Quality
Value
Overall
Quality
Value
Overall
Very very good motor! Cannot recommend highly enough. Sold elsewhere as DYS and made by a very reputable oem manufacturer in china.

Great quality, nice windings, decent bearings, connectors come pre-soldered and the adapter and mounting kit are included too.

Don't panic about the 70A speedo, it runs just fine on a 50-60A with no fire to speak of. Turns a 13x6 on 3S and gives bags of power, the big fat bearings are good for high G loadings and it's lovely and smooth. Stick one in the EPP hybrid MXS or Edge and you'll have a very capable 3D setup.

Highly recommended, I still love this combo even after the arrival of a PA bandit :)
Quality
Value
Overall
Quality
Value
Overall
I tested this motor with a 60A ESC, 3S (11.1v), 25C, 10x7-three bladed. The results at full load was -> 400W/36A. Too hot for a 40A ESC, strongly recomended a bigger one.
Quality
Value
Overall
Quality
Value
Overall
Perfect replacement for Parkzone 1.100mm warbirds, e.g. F4U Corsair
'Comes with propeller adapter for 5mm-shaft

Passt perfekt in Parkzone 1.100 Warbirds, z.B. F4U Corsair
Wird mit Propeller Adapter fr 5mm welle geliefert.


Quality
Value
Overall
View all reviews
Upload
Videos
  • Sbach 342 1200 EPP Hacker model _ FunTork !

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Turnigy D3542 Outrunner download now [157kb]

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').