Turnigy® dlux ESCs have set a new bench mark in quality and performance. Each ESC uses a twin PCB design separating the motor power supply & MCU. This design allows for optimum component layout on each PCB and provides the ideal configuration for heat dissipation and thermal efficiency. Both PCBs are enclosed in a full aluminum heat sink casing to ensure maximum heat dispersion. All Turnigy dlux ESCs can be programmed via a programing card or by transmitter. Clear and easy to understand instructions are included.
Max Cont Current: 160A
Max Burst Current: 180A
Max RPM (2-pole): 200,000rpm
Size: 83 x 33 x 23mm
Motor Plug: Female 4mm bullet Connector
Battery Plug: Nil
Features: Spark Eliminator Lead with 2mm Plug
Extremely low internal resistance
Very low operation temperature
Over temperature protection
APEC MoSfets (Taiwain)
Battery Type: 6S~12S
LV Cut off Type (Ignore, Reduce Power, Stop Motor)
LV Cut off setting (2.5~3.5v in 0.1v increments)
Timing (Auto, Very Low, Low, Normal, High, Very Hgh)
Active RPM Control: On/Off (Governor Mode)
Default factory settings.
Battery: LiPo Auto Detect
Low Voltage: 3.2v (power down motor)
Note: Programming box now available, check the related items below.
Hmotnost ( g )
Bought to power a big boat on 10S.
Before puting a custom watercooling on it, runned it on 10S out of the water (no load).
Burnt almost instantly, do not understand the issue, but seems of not very good quality.I ordered one of these to replace a 35ccNGH motor I had bought from Hobbyking that arrived damaged and was warrantied but still absolutely refuses to run inverted so I decided to go electric instead. Ironically, the ESC arrived, looked great,looked well built but would not power up ? I kind of had to chuckle having spent this money to replace another high buck product from here and now I have the same plane with two power systems that still has not flown LOL ! I found a Youtube video with this ESC that had the same problem for that guy. But know, I am happy with Hobbyking, they're doing a great job and they're stuff is reasonably priced. I just happened to get two lemons for the same plane 6 months apart.Muy facil de programar,asta ahora bien,lo tengo instalado en una turbina de 90 electrica a 12sUsed this three times drawing 101 amps on 10S. On the third flight it went off with a bang, melting itself and dropping molten solder onto the bottom of the cowl (spun aluminium luckily). Luckily it was not mounted in the fuselage or my 1/3 scale WW1 Moraine may have been shot down in flames.Too late for me to realize that there were actually so many bad reviews on this dLux esc. I just couldn't agree more with those negative comments and reviews. Here's the video proof. https://youtu.be/Ej0BkiQWESI
Don't bother the 4 star ratings, without it, my review will simply disappear in the thin air! I gave it 0 star!Too late for me to realize that there were actually so many bad reviews on this dLux esc. I couldn't agree more with those negative comments. Here's the video proof. https://youtu.be/Ej0BkiQWESIfacilmente programmabile e di grande affidamento....davvero un ottimo regolatoreCompared with its big brother on steroids - the Turnigy Dlux HV 250V, (that I bought shortly before this one), this high power, HV ESC is significantly more compact & only about a third of the weight, but still feels very solid & has good heat-sinking. Not the same overkill with the leads & connectors of its big brother either. All power-carrying leads are 10AWG, with the motor tails pre-terminated in gold 4mm females, while the power connections are tinned bare ends. Theres also, a thin anti-spark pre-connection lead on the positive side of the supply. ....... This HV ESC programs fine with the Turnigy Dlux programmer BUT - there are absolutely no relevant instructions supplied with the ESC or the Dlux programmer regarding connection to or how to use the programmer so you have to discover for yourself that this ESC (unlike many other BEC-less ESCs, including Turnigy K force series etc.) has to be connected to HV motor power (6s LiPo min) AS WELL as being supplied with 5v/6v on its "servo" lead (as per normal with non-BEC ESCs) before the programmer will talk to it.Great ESC, great price too... I have this wired up to the HK rotomax 50cc motor and seems to handle everything okay. The anti spark feature that comes with this ESC I haven't used, I just covered the bullet with heat shrink and shrunk it onto the red main wire lead. I have made a separate anti spark connector. I like it HK! Thanks a lot!!! :)Received, but have not had a chance to use yet. Arrived greatly packed and looks great.