Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy G25 Brushless Outrunner 710kv

Turnigy G25 Brushless Outrunner 710kv

QTY:

Now save Uložit 0,00 € 0,00 €

23,58 €
Stock:
Váha:
268 g
SKU:
G25-710

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Popis
produktu

Designed to be a direct swap out for your 25 size glow engine. This brushless outrunner will provide more power and with its high efficiency , long run times.
A quality motor, built specifically for planes designed to fly with a 25 size glow engine.

Spec.
Battery: 3~4 Cell /11.1~14.8V
RPM: 710kv
Max current: 44A
Watts: 600w
No load current: 11.1V/1.6A
Internal resistance: 0.045 ohm
Weight: 185g
Diameter of shaft: 5mm
Dimensions: 35x53mm

Test Data:
14.8v - 13X4 Prop - 26A - 2200g Thrust

Product
Specifications

Další informace

  • SKU:
    G25-710
  • Brand:
    Turnigy
  • Hmotnost ( g )
    268.00
  • Délka
    89.00
  • Width:
    45.00
  • Výška:
    52.00
  • Kv (rpm / v)
    710.00
  • Maximální proudy (A)
    44.00
  • Výkon ( W ):
    600.00
  • Délka B ( mm ):
    53.00
  • Může Délka D ( mm )
    36.00
  • Maximální napětí ( V)
    15.00
  • Hřídel A ( mm ):
    5.00
  • Unit Weight (g):
    185
  • Průměr C ( mm )
    35.00
  • Celková délka E ( mm )
    78.00
  • Odpor ( mh):
    45.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is installed on one of my custom stick planes. Due to weather I have not had time to fly it yet
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have purchased two of these motors. Overall quality of the motor is very good however there is a problem with the collet adapters that are included with these motors. Note that the motor is rated for 600watts. Well you aren't going to be using some cheap prop with a thin hub to get 600watts. Most will be using something like an APE prop which has a very thick hub, or a Master Airscrew. That means you will have to purchase a longer collet adapter like the Hyperion long 5mm adapter. So whatever the price of this motor is tack on an additional $14 for an adapter that will actually work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used the moto glider laminate 2 meters 1750g of carbon folding propeller 13x6, 5 and a pack of 2200mAh. The model in this nicely set up then and not vertically but in 10-15 seconds are my height to glide.
I am fully satisfied with the engine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is the first of the G motors i have bought and i love them they have a smooth start no judder and can handle a 4000mAh connected to HobbyKing 60amp ESC with 4amp UBEC. they are solid it has a 5mm shaft but it does`nt come with 3.5mm connecters for the ESC just bare soldered tips to fix your own connecters.I will be buying more of the G motor`s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor seems to have plenty of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This product replaced the stock motor in my PZ P47D. I also put a 60 amp esc and a 10x10 APC E propeller. Let me tell you, this thing moves! I am also using a Zippy 2200 4 cell 40C battery. The number are: 34 amps 522 watts @ 16.56 volts. This is giving me a top speed of around 83 mph (gear down) and with the gears up should be in the ball park of 94 mph. Vertical is endless! I also use the factory 3 cell 2200's (25C) and the flight is very nice. My only complaint is that it doesn't come with the banana plugs, not even loose in package for you to solder them on yourself. BUT for the price, I can get 2, buy the plugs, solder it for the price of the Eflite.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have recently bought 6 of these motors for an over-sized hexacopter I'm building. While I haven't run them yet so I have no data on them, I did take them apart for a good inspection.

I'm very happy with these motors, all the magnets in all 6 motors were glued down perfectly centered and all. Shafts perfectly straight and no scratches what so ever. I bought some really good bearing oil which I will apply to all the bearings before I run them up for the first time. 5/5 so far, thanks HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this as a replacement for my Parkzone BF109. It fit perfectly and I matched it with a TURNIGY TRUST 55A SBEC Brushless Speed Controler. I haven't flown it yet but here are the bench test stats:
Output 50pcnt Output 100pcnt
Watts Amps Watts Amps
80.4 7 331 31.3
Should be a monster!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bardzo super posiada wszystkie potrzebne funkcje.pozdrawiam.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').