Designed to be a direct swap out for your .60 size glow engine. This brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a .46 ~ .62 glow engine.
Battery: 5~7 Cell /18.5~25.9V
Max current: 40A
No load current: 10V/2.7A
Current capacity: 60A/15sec
Internal resistance: 0.06 ohm
Weight: 359g (not including connectors)
Diameter of shaft: 6mm
5S~7S Li-Po / 16 ~ 24-cell Ni-MH/Ni-Cd
14x8 ~ 16x10 prop
Suitable for sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg).
Hmotnost ( g )
Kv (rpm / v)
Maximální proudy (A)
Výkon ( W ):
Délka B ( mm ):
Může Délka D ( mm )
Maximální napětí ( V)
Hřídel A ( mm ):
Unit Weight (g):
Průměr C ( mm )
Celková délka E ( mm )
Odpor ( mh):
I have hundreds of hours on this motor running with a 6s 5000 and a 15-8 prop on a 60 size Rascal knockoff. I always performs well and runs cool. I get easy 15 minute flights with plenty of capacity to spare. Very nice motor!I am surprised at the power this little motor has. I may never go back to nitro fuel againSe lo he puesto en un AT-6 TEXAN EP/GP VQ MODEL 1540MM y queda perfecto tanto de peso y equilibrado como de potencia.Running with a Turnigy 5s5000, plush 60 esc, & 16x10.
I put this in 2 different "60" size airplanes at about 8lbs that previously had glow engines in them. With a 60 glow they would go like a bandit
This engine ran excellent, but performed very weak. A loop was about the max I could expect.
Prop calc showed that with a 5S this motor should have performed much better, so not sure why it was so weak.
Others have said this engine needs a 6S. While I have not tried that yet, I would say that it is probably a must in order to get motor to run equivalent to a 60 glow.Super Motor mit viel Power, habe eine 16x10 Latte dran.Super Laufeigenschaften, keine "komischen" Gerusche usw! um das Geld absolut Top!I would tell about this motor THAT I ORDERED A MONTH AND A HALF AGO, AND STILL HAS NOT ARRIVED, AND NOW IM TOLD WOULD BE UP TO ANOTHER MONTH AND A HALF BEFORE THEY WILL SHIP NEW OR REFUND MY MONEY. BUT THEY TOOK MY MONEY IMMEDIATLY. WHAT A RACKET THIS IS. HOBBY KING COMPETITORS MAY CHARGE MORE, BUT AT LEAST THE CUSTOMER SERVICE WOULD BE BETTER. HOBBY KING IS A COMPANY OF THIEVES!!!!!!!!!!!!!Good powerful motor for thre moneyThis is huge! It works, great for quads, but are hard to mount a prop adapterThe motor is excellent, good look and super performance. But the data included are not complete and missing: number of poles, timing( medium or high ?). frequency( 8Khz or 16khz ?). These data are very important when installing the Controller ( ESC ) in order to obtain the best efficiency of thr motor. Can someone tell me those informations?There are discussions that these motors are the same as eflite. I have one of these and an Eflite 60 and they are not the same. If you look in the can of the Eflite, you will see that the open end of the can has a metal retainer to hold the end of the magnets from sliding around or out. The HK version only has glue at that end and that is where 'eventually' the magnets WILL come loose and and the motor will probably destroy itself. Eflite 60 $100 US, Turnigy G60 $50 US (09/12). Until the magnets are fixed properly, my choice is Eflite with it's 55A continuous. I would bet that my Eflite is running long after my G60 kills itself putting my airplane in jeopardy. G60 going in the Stick, Eflite 60 in the Spit. BTW, I also purchased a SK3 5045 500kv and IT HAS THE RETAINER but not the 450kv version. Looks like HK has seen the light and is STARTING to produce a quality design. Hopefully in a couple of years we won't be having these problems. Now if they can only make a hardened shaft.....