New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy HV-787 Digital HV-2S Servo 8.44kg/ .033sec / 67g

Turnigy HV-787 Digital HV-2S Servo 8.44kg/ .033sec / 67g

Discontinued Product

Please continue searching for a similar product.
Váha:
157 g
SKU:
HV787PLC
WANT FREE SHIPPING? Click here to find out more!

Turnigy Plastic case, Titanium gear, high-voltage servo with dual XL bearings.
Servos dont get better than this!
The Turnigy HV-Servos are the best bang-for-buck in the high performance category. Guaranteed!
Why waste money on over-marketed servos!? Trust Turnigy to deliver more than the required performance for your heli or plane.

Specification:
Dead band: 0.0008 ms (Default)
Control System: +Pulse Width Control
Working frequence: 1520μs / 333hz 
(RX) Required Pulse: 3.5 ~7.4 Volt Peak to Peak Square Wave
Operating Voltage: 6.0 ~7.4 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (6.0V): 0.041 sec/60° degrees at no load
Operating Speed (7.4V): 0.033 sec/60° degrees at no load
Stall Torque (6.0V): 6.85 kg.cm     (95.10 oz/in)
Stall Torque (7.4V): 8.44 kg.cm     (117.2 oz/in)
360° Modifiable:  NO
Motor Type:  Coreless Motor
Potentiometer Drive: Indirect Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO
Connector Wire Length: 15.0 cm          (5.90 in)
Dimensions: 40X20X43 mm (1.57x0.97x1.69 in)
Weight:  67.6 g            (2.38 oz)

  • SKU HV787PLC
  • Brand -
  • Hmotnost ( g ) 157.00
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
  • Točivý moment ( kg) (min . 0,01 kg ) 8.44
  • Rychlost ( Sec / 60deg ) 0.03
  • A ( mm ) 49.00
  • B ( mm ) 40.00
  • C ( mm ) 45.00
  • D ( mm ) 21.00
  • E ( mm ) 55.00
  • F ( mm ) 33.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The servo's work excelent, but you cann't order replacements gears !! I think that's not good, because also 'good' servo's wear. If you know which gears I can order, PLEASE LET ME KNOW!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The servo's work excelent, but you cann't order replacements gears !! I think that's not good, because also 'good' servo's wear. If you know which gears I can order, PLEASE LET ME KNOW!

I have received my servo and tested it on 2S direct lipo and tested perfect!! It centers perfectly, it is super fast and will be used as a throttle servo for my 3W 75cc with pipe gas engine. As it has titanium gears it should last a lifetime. It is a perfect servo for instant throttle response I highly recommend it!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have received my servo and tested it on 2S direct lipo and tested perfect!! It centers perfectly, it is super fast and will be used as a throttle servo for my 3W 75cc with pipe gas engine. As it has titanium gears it should last a lifetime. It is a perfect servo for instant throttle response I highly recommend it!!

Great quality & specs for the price, using it in AHF 50 3D Heli, work great as cycling servos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great quality & specs for the price, using it in AHF 50 3D Heli, work great as cycling servos

Muy buena presentacin, viene en caja y con proteccin como cualquer servo de alta calidad, yo lo tengo instalado en spektrum y es muy rapido y preciso. Buena calidad precio. Good sevo for price ajusted, good presentatin in rigid plastic with protection, i'm installing in spektrum receiver and very speed and precision

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Muy buena presentacin, viene en caja y con proteccin como cualquer servo de alta calidad, yo lo tengo instalado en spektrum y es muy rapido y preciso. Buena calidad precio. Good sevo for price ajusted, good presentatin in rigid plastic with protection, i'm installing in spektrum receiver and very speed and precision

super fast and centers well. I use it on my HK600 Tail

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super fast and centers well. I use it on my HK600 Tail

A VERY GOOD SERVO FOR THIS PRICE.BYT WE NEED 7.4 VOLT RECEIVERS (2.4GHZ PREFERABLE). I USE THE SERVO WITH 6 VOLT BECAUSE OF MY RECEIVER.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A VERY GOOD SERVO FOR THIS PRICE.BYT WE NEED 7.4 VOLT RECEIVERS (2.4GHZ PREFERABLE). I USE THE SERVO WITH 6 VOLT BECAUSE OF MY RECEIVER.

Ich habe Testhalber 1 Stck gekauft und bin sehr begeistert von diesem Servo. Habe 1 Eimer mit 8kg Wasser gefllt und (Gesamtgewicht Eimer plus Wasser 8900gr.) an das Servo gehngt (mittels Gestnge). 10mm vom Drehpunkt. Das Servo hat diese Last locker bewegt. Superschnell und przise. Keine Abweichung festgestellt vom Neutralpunkt. Es erwrmt sich unter dieser Last. Von 21 auf 33Grad. Bin begeistert. Stingray von Wings and More wird damit bestc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe Testhalber 1 Stck gekauft und bin sehr begeistert von diesem Servo. Habe 1 Eimer mit 8kg Wasser gefllt und (Gesamtgewicht Eimer plus Wasser 8900gr.) an das Servo gehngt (mittels Gestnge). 10mm vom Drehpunkt. Das Servo hat diese Last locker bewegt. Superschnell und przise. Keine Abweichung festgestellt vom Neutralpunkt. Es erwrmt sich unter dieser Last. Von 21 auf 33Grad. Bin begeistert. Stingray von Wings and More wird damit bestc

Ser ud til at det lige er dem jeg skal bruge i min revo 3.3 - Kber sgu' lige 2 stk. Must try.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ser ud til at det lige er dem jeg skal bruge i min revo 3.3 - Kber sgu' lige 2 stk. Must try.

Ich habe 5 Stck in einem X-treme 50 Nitro Heli im Einsatz ohne Probleme.

2S Lipo dran und gut. Als Ersatzteil einfach den Metalldeckel der MKS dazu packen und dann sind sie gleichwertig

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe 5 Stck in einem X-treme 50 Nitro Heli im Einsatz ohne Probleme.

2S Lipo dran und gut. Als Ersatzteil einfach den Metalldeckel der MKS dazu packen und dann sind sie gleichwertig

Servo super rapide pour contrler le rotor de queue d'un hlicoptre ornith 46, classe 50. Il manque une toile car il est trs bruillant.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo super rapide pour contrler le rotor de queue d'un hlicoptre ornith 46, classe 50. Il manque une toile car il est trs bruillant.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!