Take advantage of the new high C charge rate on the new Zippy, Turnigy, and Tunrigy Nano-Tech battery packs with the new Turnigy Mega 400W V2 charger.
This is a new and improved version of the original Mega 400W charger.
The Turnigy Mega 400W V2 is a high power balancing charger/discharger which can handle up to 20A charge rates on 6S LiPo/LiFe and 18S NICD/NIMH accurately. Bundled with the Turnigy Mega 400W V2 is an array of charging wires and plugs, suitable for most applications.
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing charge & discharge
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
High-power and high-performance circuit
Store function, allows safe storage current
Data storage (Store up to 10 packs in memory)
Note: Temperature sensor not included.
Input voltage: 11.0 – 18.0Volt
Charge current: 0.1 – 20.0A
Discharge current: 0.1 – 5.0A
Maximum charge capacity: 400W @ input voltage >15V
Maximum discharge capacity: 25W
Current drain for balancing Li-po: 200mAh/cell
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series
NiCd/NiMH battery cell count: 1 – 18 series
Pb battery voltage: 2 –24V
Battery setup memories: 10
Intelligent temperature control: Yes
Dimensions : 146x144x56mm
1 x Turnigy Mega 400W V2 charger
1 x JST XH Adapter
1 x Banana plug w/male XT60
1 x Banana plug w/bare Leads
1 x XT60 w/aligator clip
1 x XT60 w/female JST
1 x XT60 w/female Futaba
1 x Aligator clip for charger input leads
This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT,TURNIGY and any pack with a JST adapter.
Note: Power supply and temperature sensor not included.
Kapacita ( mAh )
Hmotnost ( g )
When it worked it worked noisy but fine. It burned after just 1.5 years of use. That never happened to me with a charger. I have had at least 8 chargers of different brands. Normally i could sell them because of increased powerdemand. This one ended in the garbage bin a couple of years to soon.Very Bad Charger, I charge only 20 batteries and now Itsn´t balance, never stop the charger, always "dancing qickly" bettwen 4.16 ans 4.22
I have the charger since 1 year...and 1 month and I could´t use the warranty,never againOtherwise nice charger, but internal temperature sensor shows 17deg celsius, and the fans are running in full throttle, very loud charger.
I use server power supply with 14v@47 amps and its much quieter than this.
Calibration is off, so compared to original Imax B6 (with cheali charger mod), and the voltages are 0.2 volts off compared to it. Verified with multimeter.
So quality is not good, interface is a copy of Imax B6.
It has banana plugs for charger connection and cables/balance board are good. Have to test it later with Cheali charger mod to be able to calibrate it.
(Stock version can not be calibrated).I bought this one on sale, but that's not the only reason. I LOVE the Turnigy chargers. Easy to use and work just great! I've had my original acucell-6 for about 7 years now and its still going. This one is more than adequate for my charging needs of 4 and 5s 5000mah packs. Actually, it's capable of more than twice the amount of power I need.. 'Nuf said...This is the second one i have bought and i am very happy with it. The only bad is that these are very loud - fans are louder than my heli :D, but cherging is good and acurate enough and most important i can charge fast my 5000mah 6 s batts. ByeSuper Charger! So good, easy to use and reliable I bought another!
Although the new one had a malfunctioning key/button, I followed the Returns/RMA procedure, made a little video on my phone, and Hobby King are sending out another no arguments! Brilliant service!
consigliato dai miei amici ,sono contento di averlo comprato ottimoGreat charger. Charges my 10000 mah 4cell in 30 min. @ 1C (10a for this battery) YOU NEED A GOOD POWER SUPPLY one that can deliver the amps like HobbyKing 540w 100~120v Power Supply (13.8v~18v - 30amp) I'm not using that one but one similar from efuel power regardless you need power to drive this charger running mine at 15.3v 10aGoeie lader met veel vermogenNice product.. Wait for it to go on sale though.
noise fix3 download now [214kb] noise fix2 download now [162kb] noise fix download now [203kb] No File Name download now [203kb] Manual download now [1756kb] manual download now [1756kb] No File Name download now [128kb] T400W-V2 Manual download now [1756kb] MANUAL download now [3.52Mb]