New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

TURNIGY MicroMotor 14-03 5100kv

TURNIGY MicroMotor 14-03 5100kv

Discontinued Product

Please continue searching for a similar product.
SKU:
C14-03-5100
WANT FREE SHIPPING? Click here to find out more!

TURNIGY MicroMotor 14-03 5100kv

Spec.
Kv: 5100rpm/v
Power: 20W
Turns: 18
Resistance: 1.2ohm
Idle Current: .4A
ESC: 5A
Lipo: 1-2cells
Prop: 4x4
Weight: 6g including mount
Shaft: 1.5mm

Due to the tiny size of this motor and the small differences in propellers we suggest you experiment with different propeller brands to find the right solution.
Do not exceed 4.1 x 4.1 sized propeller.

  • SKU C14-03-5100
  • Brand -
  • Hmotnost 43.0000
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
  • Kv (rpm / v) 5100.00
  • Maximální proudy (A) 4.00
  • Odpor ( mh) 1.00
  • Maximální napětí ( V) 7.00
  • Výkon ( W ) 20.00
  • Hřídel A ( mm ) 2.00
  • Délka B ( mm ) 19.00
  • Průměr C ( mm ) 14.00
  • Může Délka D ( mm ) 6.00
  • Celková délka E ( mm ) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

type 1403 ha gazou toha tigau

imoneji ga naku koteisiki de daikara ha motor wo hazusenai

motor kara deteiru sen ha hosoi enamerusen de gazou no youna

hifukusen dehanai



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

type 1403 ha gazou toha tigau

imoneji ga naku koteisiki de daikara ha motor wo hazusenai

motor kara deteiru sen ha hosoi enamerusen de gazou no youna

hifukusen dehanai



Received two of these small motors today. The picture on the website shows three colored wires (Red, Black, White) covered with insulated tubing. The product I received today does not have any covered ESC wires. Instead I have three exposed single stranded copper wires which are very fragile and I will have to cover myself. This is the first time I have been dissapointed with a purchase from Hobby King. I did NOT receiving the product in the picture on the website.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received two of these small motors today. The picture on the website shows three colored wires (Red, Black, White) covered with insulated tubing. The product I received today does not have any covered ESC wires. Instead I have three exposed single stranded copper wires which are very fragile and I will have to cover myself. This is the first time I have been dissapointed with a purchase from Hobby King. I did NOT receiving the product in the picture on the website.

Bought 2. One came with shrinktubed leads, other with longer but plain wires. One shaft i pushed out easily with the prop. And both motor is shaking only, they do not work with any esc any timing. It might be bad luck but seems there is no quality control at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 2. One came with shrinktubed leads, other with longer but plain wires. One shaft i pushed out easily with the prop. And both motor is shaking only, they do not work with any esc any timing. It might be bad luck but seems there is no quality control at all.

14-03????????????????????????????????????????????????3????????????????????????????

??????????????????????????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

14-03????????????????????????????????????????????????3????????????????????????????

??????????????????????????

It is a very good motor once in the air, however my casing wasn't tight to the shaft so it could slide around and I couldn't get my prop on because it just pushed the shaft in. Also when soldering plugs on to the wires, the wire came off and had to be soldered back on. But then they broke off again! this time the solder did not come apart the winding broke off and I couldn't solder the wire back on. so now I have had to order a new on. in its favor it is cheap enough to buy another on I hope my experience with the next on is better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is a very good motor once in the air, however my casing wasn't tight to the shaft so it could slide around and I couldn't get my prop on because it just pushed the shaft in. Also when soldering plugs on to the wires, the wire came off and had to be soldered back on. But then they broke off again! this time the solder did not come apart the winding broke off and I couldn't solder the wire back on. so now I have had to order a new on. in its favor it is cheap enough to buy another on I hope my experience with the next on is better.

25/08/10

Purchase 1, then 8 weeks later another, BIG diffrence between the 2, First 1 perfect, 2nd glue everywhere, on sharft, on magnets making turning very ruff. First 1 had red insulation on end of wires, 2nd had NO red insulation and very very long wires ? The motor was very easy pull apart,( a bit to easy ) to remove the lumps of glue.

First motor, 5 stars!!!

Second motor, 3 stars for QC !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

25/08/10

Purchase 1, then 8 weeks later another, BIG diffrence between the 2, First 1 perfect, 2nd glue everywhere, on sharft, on magnets making turning very ruff. First 1 had red insulation on end of wires, 2nd had NO red insulation and very very long wires ? The motor was very easy pull apart,( a bit to easy ) to remove the lumps of glue.

First motor, 5 stars!!!

Second motor, 3 stars for QC !!!

Wir ohne irgenein Zubehr geliefert. Die Motorkabel sind einfach die verzinnten Kupferlackdrhte. Lieber den T1400-4500 nehmen, da ist alles dabei(Goldis!!, Schrumpfschlauch, Propsaver und Gummi)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wir ohne irgenein Zubehr geliefert. Die Motorkabel sind einfach die verzinnten Kupferlackdrhte. Lieber den T1400-4500 nehmen, da ist alles dabei(Goldis!!, Schrumpfschlauch, Propsaver und Gummi)

Great little motor. Lacking in the torque I wanted for my application, but a great motor regardless. Running on 1S with a 1Gram HC 3 amp esc. The mount is a lot heavier than it needs to be, but I just removed it and glued the motor into a balsa firewall I made.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor. Lacking in the torque I wanted for my application, but a great motor regardless. Running on 1S with a 1Gram HC 3 amp esc. The mount is a lot heavier than it needs to be, but I just removed it and glued the motor into a balsa firewall I made.

I need some help trying to solder bullet connectors for this one. All three wires run togther through the shrink tube, not sure if I am supposed to pull the shrink tube off and put individual pieces over each wire, or what???? Help

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I need some help trying to solder bullet connectors for this one. All three wires run togther through the shrink tube, not sure if I am supposed to pull the shrink tube off and put individual pieces over each wire, or what???? Help

Very lightwight Motor.

9N12P. Windings are with glue, so it is very hard to rewind it : (

Magnet glue is also very strong.

My Motor weights 5g with other winding and modyfied mount.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very lightwight Motor.

9N12P. Windings are with glue, so it is very hard to rewind it : (

Magnet glue is also very strong.

My Motor weights 5g with other winding and modyfied mount.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!