More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 45C Constant / 90C Burst
Weight: 93g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT-60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Kupil 2 akka dlja motoplanera.Tynut ozen horoso.Zalivaetsja 1050 &1090 mah.Tok 30 A.Poka ne nadulis.GREAT DEAL AND THESE HAVE AWSOME PUNCH, IM USING IN MY 250 FPV QUAD WORKS SUPER WELLawesome for quads , hold power wellExcellent batteries, good performers, my 300g non fpv quad goes for 6 minutes straight.Treat this lipo well and it may give you years of good service! Well worth their price.Excellent battery tested on Walkera MasterCP, much better than stock battery. I also tested with this helicopter one Zippy 25C and nothing compares to this nanotech, high punch and last longer.These battery pack a powerful punch and are a great price.great batteries always giving me power through my flightsGreat battery, works flawlessly and doesnt get hot at all in my racequad. Beware that it holds its voltage until the very end! Charging at 1C just to be safe.MINI QUAD AWESOMENESS
Finally made my first mini quad, and I got these batteries because I knew my current 1000mah 3s lipos wouldn't cut it. These fly a 280mm quad with tons of power for 6:30 using 6 in props and 1806 motors. The AUW of the quad is just under 600g with an old gopro and fpv gear. When I reach the lvc and recharge them they each take just over 1100mah. The batteries are barely warm, but I still wouldn't recommend hitting the lvc like I regularly do. I balance charge them at 2A and it takes about 30 min to bring the cells to a full 4.2 each (which is remarkably short)
I'LL BE BUYING MORE :)