More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 25C Constant / 50C Burst
Weight: 110g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT-60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Love these nanotech batteries. This one makes the Rarebear terrifying fast.I have had great results with all my Turnigy NanoTech batteries. Worth buying!great for going 4s mental on miniquadone of the best value for mony lipo you can buyGood battery. Used in my 32" pop wing with Funfighter 1950kv motor, 6x4 prop. Pop wing is like a little rocket. Insane 90 degree vertical climb. Battery was very warm after 5 min flight (with some throttle management). Going to try 7x4 prop next time and see what happens. 3 stars for quality because battery has high internal resistance 12, 14, 12, 14. I have 1.5 year old batteries with resistance of less than 10 per cell. Only time will tell how long this will last.Nice fit for the Sbach 342 EPP 900mm with a D2830-11 1000kv Brushless Motor. Good quality for a fair price, as always.Heh heh! Arrived perfectly balanced and weight as described. Awesome little packs running a 4S setup in a WingWing Z-84 with a Funfighter motor! Cracking performance.Tested at 10A and 20A on a high accuracy DC Load (not a low end charger). Capacity was around 950-1000mAh on multiple tests.
90pcnt of the capacity @ 25A should be easily attainable.I run this on my 50mm F22. decent flight times for a 1000mah. just remember to have throttle control. 1/2 to 3/4 throttle with 5 to 10 sec full throttle bursts.the normal accumulator, but capacity at it it is underestimated about 850 mAh it is checked on Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories,Turnigy Accucel-8 150W 7A Balancer/Charger, one of elements to the battery at the end of a cycle of discharge has very underestimated capacity.