The Turnigy nano-tech round single series cells are the perfect solution for many applications where space and weight are at a premium. These round Lipoly cells can be soldered together to make custom packs to suit your needs.
More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 1s / 3.7V
Discharge: 15C Constant
Dimensions: 58mm x 15mm
Balance Plug: N/A
Discharge Plug: N/A
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity. These additives create the ability for imbibition in the carrier liquid to supply more ion channels.
This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
The voltage sag on these batteries is insane. I'm getting .70 to .90 voltage drop under an 8 amp load. Also, i can't seem to charge several batteries above 4 volts. Wow! Do not purchase these.I ordered 18 of these ( i had originally planned on ordering 16 to make 4 packs ) and only 1 was faulty ( the end was super fat and the voltage read 0 ). I have not measured the capacity, though, if any turn out to be drastically bad i will edit this post.The description of these batteries is a bit confused, describing them as both LiPo and LiIon. They are in fact LiIon. Two of these in series with a balance lead and a discharge lead make excellent and compact glider packs. if 1200mAh is not enough for you then just make 2.great for dlg rec pack fits greatThis cell is a fantastic replacement for the NiMH battery in the Libelle DLG. It has more than doubled my flight time and yet weighs less than the original battery! I didn't have any trouble soldering to the terminals with standard solder.TL;DR - Waste of money.
Not impressed. I combined 3 to make a 3s battery, and the performance was very lacking. When compared to my Turnigy 20C 1000mAh 3s battery, it sucks. The 3s battery I made should deliver 18A no problem (15C*1.2Ah), while the turnigy 20A (20C*1Ah). However, the battery I made became hot (not the wires; the cells became hot), and the voltage sagged a lot more. These cells don't even come close to being 15C, and are essentially useless for my purposes. Well, I guess now I have a battery that can power an FPV ground station for a while, but even with a ground station that draws around 1A, the cells still become a little warm, while my Turnigy remains at room temperature!Got two of these a few days ago for a micro RC boat project. I discharged them at 1.5A (1.25C) down to 3.3V. I got 1225mah out of one and 1199mah out of the other. Looks good to me !These are awesome. Use them in my dlg glider. Small and fit perfectly in the fuse. No more switching batteries. One fully charged will last hours. Highly recommend these!Super Akku fr kleine Hangflieger. Dieser Lipo kommt bei mir in einem Sal-Raptor zum EInsatz. Er hat die ideale Grsse und ewig Power. Ich finde das Format persnlich besser als die flachen Lipos.You can make custom lipo battery packs. I made a 7.4 2400 mah 36 amp discharge rate battery. I soldered 2 lipos in series and 2 in Parellel. This are tiny so they are perfect for small areas