When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.
The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!
Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 94g (including wire, plug & case)
Dimensions: 128x17x20mm (Each)
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology
*The length of balance charging wire may vary
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
thank you vary vary fast delivery wowFit well in M4 stock crane style eag.
You can put one in each outside tube
This will allow a spare battery.
Fit well too into AK74U
A must to have for airsoft players.
The only problem is you have to be very very patient.
I bought 2 batteries on May 31st and I finally received it August 12nd
good battery but this will fit to APS stock tube(lenght 140mm) but for orther stock like Dboys u must use 1000mAh because this lenght 110mm and you can't use mosfetgood LiPo bat for airsoftTamao justito para su uso en culatas tipo crane (roza sin llegar a daar el plastico, si se hincha no entra), tambien ideal para guardamanos de SVD y cuerpos de AK (tipo lapiz se sobreentiende). cyma - 1200 \ ( 130 \).
.nice lipo for my airsoftgunGREAT BATTERIESS!!!!!
They came very well balanced (2nd cell was only 0.02v off)
These fit almost all cranestocks, G36 handguards (KWA), buffer tubes and of course, full stocks. They dont fit in M4 handguards (KWA tested) or AK top covers. (Dboys) I have not tried it in Mp5s that have the battery on top, but i imagine they wouldnt fit.
5/5Very nice product for Airsoft use. You can use it in crain on the back of replica. If it would be 1mm wider or higher it wouldnt fit into the tube.
I do not advice it for any gear. It gives a lot of torque and high rotation speed. You can load the spring up to 160m/s.
I would appreciate if would be possible to made 20mm shorter battery. The power and balance cable should be made of maximal length 25-30mm.
Very nice LiPo for airsoft guns at a great price! There is absolutely no reason to buy the more expensive Firefox or Flame brands. The main wires are pretty long (slightly over 140mm incl. connector), while the balance tap measures around 80mm. I usually get rid of the Tamiyas and convert them to high-current T-connectors instead.
One of these stick LiPos fits nicely in a buffer tube if you are using a Magpul MOE stock.
But you can *double* the capacity (ie. to 2400mAh) if you use two of these LiPos in an H&K 416-style crane stock in a parallel configurationwith a parallel adapter, of course, that you can solder on your own. More info here: http://1st-sword.com/forum/viewtopic.php?f=23&t=1810&p=15998#p15998
You can do the same parallel configuration with many other front-wired M4s that still use the *plastic heat shield.* Definitely works in a APS M4, ICS M4, and JG M4 CQB.
This LiPo stick also fits in a G36 handguard.