Designed specifically for the Walkera QR Ladybird/Genius CP/Mini CP. A direct replacement for Walkera WKLIP230.
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
This particular battery has a 2-pin Molex connector. Please refer to the attached image as this Battery has the "A" plug polarity. Please make sure this battery suites your connection. The wrong polarity will damage your electronics.
Voltage: 1S1P / 1 Cell / 3.7V
Discharge: 35C Constant / 70C Burst
Weight: 8g (including wire, plug & case)
Discharge Plug: Walkera two pin
*The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Works (almost)perfect for my Bayangtoys X9. I had to remove the plastic cover and some tape before it would fit but now I have longer flying time and more punch. Seven flights in and no problems. Like it and will order more next shopping round. Ordered from European warehouse and received it within 48hrs.I bought two of this batteries for the Hubsan X4. Last only a few chargers, meanwhile, the original ones still working perfect.
This batteries only last 30 sec. Now. They are inflated, and I have to put them on the trash.
Very disappointed.Great !!!
I just received an email from DHL to pay $ 23 to customs.
Why a product ordered on the Europe store is finally send via china?Really powerfull battery, good for my diy quads ! Better than standards batteriesjust for mini drone. very long play time and light weght. after i use this, i need to get "rest time" for drone's moter.I tested the battery with my 12cm quadcopter, very goodBought 2 of them to feed my scisky and 4x8mm motors. I changed the plug to allow easy recharge my 2 batteries at the same time, on my 2S charger.After invert wire,perfect working on the micro t losi.
Good weigth to compare the NiMH brick stock .
Great little Lipo. good quality battery and cheapA very good product.The build itself is pretty high quality and the graphics are amazing.It also comes with a warranty. I'l be using it for an Arduino pro mini powered bluetooth smart watch