More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 25C Constant / 50C Burst
Weight: 279g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Battery is ok. Ordered it for my ez start wand for my tmaxx. works just fine for that but tried it on my losi sct and the output was far less from the other batteries offed hereExcellent product. Gave a massive improvement on performance on my HPI Trophy Truggy FluxThis is another great battery by Turnigy. Although it is not ROAR approved. it is great for you basher looking for a great battery at a great price.I bought 3 pcs. for my 1/10 car. ( http://www.hobbyking.com/hobbyking/store/uh_viewItem
) now 5 cycles. from the beginning I noticed that the accus are weak. still half full the red light and beep of my cell checker turns on. And one cell is weaker than the other in two of the packs (after discharge:3.3V, 3.6V). all cells full charged (4.18V), two month later I measured: 1.: 4.14, 4.04 2.: 4.13, 4.04 3.. 4.14 3.95V!. Is that normal to have this unequal selfdischarge?I bought 3 pcs. for my 1/10 car. ( http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=20558 ) now 5 cycles. from the beginning I noticed that the accus are weak. still half full the red light and beep of my cell checker turns on. And one cell is weaker than the other in two of the packs (after discharge:3.3V, 3.6V). all cells full charged (4.18V), two month later I measured: 1.: 4.14, 4.04 2.: 4.13, 4.04 3.. 4.14 3.95V!. Is that normal to have this unequal selfdischarge?Top Lipos werden gleich noch welche bestelltExcellent battery for the price. Difficult to find specification as well as price and quality equal to another brand.Great lipos! 1:8 buggy goes crazy on them. I used 2 2S packs to get 4S pack??? ????????
????, ????I find this good deal in this price range. Nano should be more power than usual turnigy 25C. Good to use in cars, boats. Or double them to make 4s 5000mAh lipo.