More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 5S1P / 5 Cell / 18.5V
Discharge: 65C Constant / 130C Burst
Weight: 712g (including wire, plug & case)
Dimensions: 154 x 49 x 46mm
Discharge Plug: HXT-4mm
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
I use this in my 1/8th scale monster truggy. The power produced by this battery is very impressive, and the actual capacity is 5500 mAh when setting LVC to 3.5 V. When I first got it, it would unbalance somewhat during discharge, but after a bunch of cycles, discharge is pretty uniform. I probably have close to 100 cycles through this battery, and it still performs like new. Performance/cost ratio is unbeatable. I used to think that Gens Ace was the only way to go, but this battery totally changed my mind.pura potenza,dopo 10 cicli funziona alla grandeJust recived two of this baby.
Real dimensions 48x45x158mm
Weight 710g and 715g.
First one is well balance and in the secound one cell is 3,69v and rest of cells are about 3,80-3,82v.I purchased two of these for my HPI Vorza. They both run equally well and just fit into the battery tray without any need for modification. The power delivery seems consistent and only starts to tame down just before ESC cut-off which I have set to 3.2v per cell. I balance charge them every charge (1C or 2C) on a Hyperion 1420i Net3 and they run very cool and have never puffed. The only downside is they are bigger and heavier when compared to some of the competitors Lipos and the 10 gauge power wires are too thick which makes them a nightmare to solder onto deans connectors. 12GA would have been perfect. For those reasons they lose a point on my score however overall I recommend these as a reliable and high performing Lipo product.