Now officialy approved by ROAR for race use!
More than just a fancy name. TURNIGY nano-tech Lipoly batteries are built with a LiCo nano-technology substrate complex that greatly improves power transfer making the oxidation/reduction reaction more efficient. This helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those that love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S2P / 2S Cell / 7.4V
Discharge: 50C Constant / 100C Burst
Weight:294g (including wire & case)
Balance Plug: JST
Discharge Plug: 4mm Bullet-connector to your own custom plug
Model no: NC5600.2S2P.50
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
Have one of these for about a year, it has swelled a little, but still works ok. Overall decent quality for the price.I'm using this battery on 1/10 TC with 13.5T engines. I bought 4 batteries and are working alwais fine. Low resistance, not inflated and very light. ReccomendedAfter approximately 25 charges on a high end charger this thing puffed up so much that it blew open the hard case. Not recommended..........................................Great batterys, lots of punch. I only wish the connectors were soludered at 90 degrees instead of straight.I have a couple of these and I run them in a lot of different types of trucks. Everything from Slash, Clod, Mad Force, Stampede, etc. with no issues, plenty of power and runtime, no puffing, etc. I have owned them over a year now and won't run anything else.I bought 2 of these batteries and both puffed out after 1-2 charges (one very slightly puffed and another much worse).
My discharge rate is 60A maximum if the ESC was 100pcnt loaded, but with my motor it is probably closer to 40A max. And the battery is specced at 50-100C which is a lot more than what I am drawing. So discharging too fast is not an issue.
And my charger is 5A max so that is not even close to the 8C max that the battery is specced at.
I did read about Turnigy Nano-Tech batteries online shortly after finding out they were puffed and many more people have had the same problem.
I have still used them batteries even if risking fire. So far after 5-10 charges they haven't let the magic smoke out. The hard case will prevent rupturing while in use so I'm hopeful that won't come to pass.Nice Roar App. Pack!! Great discharge rate... Nearly everyone at our local Clubs are running these... Very Nice you wont be DisappointedGot it for a few months now, worked great in beginning. Always had cut-off on 3.4v, balance charged it on normal rate but one of the cells started puffing. Very bad after this short time of using. Reviews are good so hoped for it to last langer, to bad..Great Lipo for the money. It has great power and runs my 1/10 cars for quite some time, maybe even 45 minutes (depends on how i use the throttle).
Another great thing is the 50C constant and 100C burst. You really feel the power in this battery.
I also love the fact that the wiring is exchangable, because it makes it easy to exchange the LiPo between different connectors, on e.g. different cars. Only thing you need is another wire with the right connector.
Lipos are definitely good price / quality, if I compare with the lipos at my local hobbyshop.
Only little problem is that this lipo is a little swollen after maybe 10-15 runs. But that could be also due to wrong charging mode on my charger.
The other 6600 mAH Nano-tech Lipo that I bought is not swollen at all, and used it also many many times. In comparison to the Lipos from my local shop (2s and 3s) which I had to replace after a couple of runs, because they almost cracked out of the shell.
So if you need a Lipo, and you are not sure, I would say, try a Nano-tech. You wont be disappointed. ;)