More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technologysubstrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
Unfortunately with other big brands, numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S2P / 2S Cell / 7.4V
Discharge: 65C Constant / 130C Burst
Weight: 313g (including wire & case)
Balance Plug: JST
Discharge Plug: 4mm Bullet-connector to your own custom plug
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity. These additives create the ability for imbibition in the carrier liquid to supply more ion channels.
This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Hmotnost ( g )
Kapacita ( mAh )
Výboj ( c )
Délka -A ( mm):
Výška - B ( mm ):
Unit Weight (g)
Max Charge Rate ( C ):
I play 1/10 drift , bought a total of four, one of many significant performance difference (balance charge droop) Use only the normal time 2/3. . .Bought this for my slash 4x4 with MMP 5800kv set up and it doesn't seem to have much better performance than my generic turnigy 40-50c 2s lipo I've had for several years now that's puffing. Unless I got a weaker one I'm not that impressedStrong & reliable Lipo Pack. Needs to have own plugs soldered to end of cabling to suit own car/charging system.This is a really great battery, especially for the price. Performs every bit as good as batteries that cost a lot more. Long run times with lots of punch. I will being picking up a few more.have 6 of these now and as long as you look after them with charging properly they last for ages !! had one pair for over 3 years now and still greatOrdered 2 batteries...1 is not balancing well after many hours of charging.
1st cell is 4.20v, the 2nd cell is 3.90v. When discharging it's worse at the end: 1st cell 3.0v, 2nd cell is 3.75v !!!
So a bit disapointed. Waiting for a replacement from HKExcellent battery i have 4 now running in 1/8th buggy (4s)Sets my castle mamba max pro on fire! Not literally but man does this battery preform amazing!very good quality batterys for the pricenano-techs are still the best ive used. getting 15mins with the SR4