Turnigy 100A Brushless Speed Controller
This besc is mounted on a precision made PCB, it also has an oversized heatsink held tight against the FETs with screws.
This esc can handle large motors up to 100A and 6S
Cont Current: 100A
Burst Current: 105A
BEC Mode: Opto Only
Lipo Cells: 2-6
NiMH : 5-18
Size: 78x55x15mmWARNING: For some large motors, you must use ''High'' timing mode. Failure to do so will result in a burnt esc.
This ESC is NOT for cars.
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!
Hmotnost ( g )
This speed controller, is used in aquickie racer, the controller quite large and heavy, but is does not turn even warm.
Good controller for the moneySehr guter Regler, feinfhlig zu dosieren, gut verarbeitet, gute Kabel, sehr zu empfehlenSuper Regler, wird nicht warm und ist sehr leicht mit der Programmierkarte einzustellen. Unschlagbar fr den Preis, kann man nichts falsch machen.Awesome! Sam as big name product at 1/3rd the cost!This is an excellent Controller!
I tested it on a plane with 6S setup and peaks up to about 85 Amps. Of course this controller could take even more, but it remained cool (47, at 32 outside air temperature!).
It handels very smoothly without problems.
Very good value for money!I would highly recommend this controller . This controller works well with Turnigy B36-56-04 2600kv Inrunner motors.This is just what it says..an animal that eat easily 80-90 amperes constant!Fast shipping through EMS express to Greece.!5 stars!note that you have an extra ubec or battery to power your receiver!L'apparenza non inganna. Bassa caduta e funzionamento regolarissimo con motori molto potenti (provato fino a sei celle.
Decollato dal prato senza problemi con un modello convertito elettrico e previsto per motori a scoppio classe ".40".Assembly quality is very good and it works like a charm. If you have mo then one TURNIGY ESC it is worth to buy a programing card and forget about all this beeps.This is a great quality ESC. I'm running it in my 8.2lb Ultimate bipe with the Turnigy 600kv motor and a 16x6 prop and pulling just over 1200 watts!!!!! Awesome power!!!!!