The best has now just got even better! The Turnigy Reaktor range of chargers are known for their big power and diminutive size, the latest Turnigy Reaktor offering has stuck with this formula but it now includes a built in AC power supply.
This high power balancing charger / discharger can provide up to 20A charge rates and handle up to 6S Li-poly/LiFe or 17S NiCd/NiMH accurately. Not only does the Reaktor 300W offer a super high charge rate capability it now features storage charging, cyclic charging / discharging, 10 charge parameter memory and high power balancer.
The Turnigy Reaktor 300W is an all-in-one power house charging solution for your R/C models' batteries.
• Microprocessor controlled
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing charge & discharge
• Li-ion, LiPoly and LiFe capable
• Ni-Cd and NiMH capable
• High-power and high-performance circuit
• Store function, allows safe storage current
• Data storage (Store up to 10 packs in memory)
• Cyclic charging/discharging
• Built-in AC power supply for mains charging
Input Voltage: 10 ~ 28V DC, 100 ~ 240V AC
Charge Current: 0.05 ~ 20A
Discharge Current: 0.05 ~ 20A
Maximum Charge Capacity: 300W
Maximum Discharge Capacity: 20W
Maximum Power Capacity: 300W
Current Drain For Balancing: 350mAh/cell
Lithium (LiPoly/LiIo/LiFe) Cell Count: 1 ~ 6 series
NiCd/NiMH Cell Count: 1 ~ 17 series
Pb Battery Voltage: 2 ~ 24V
Battery Memory: 10
Intelligent Temperature Control: Yes
1 x Turnigy Reaktor 300W charger with power lead
1 x Alligator Clip Charge Lead
1 x Charge Lead - No Connector
Hmotnost ( g )
Powerful and easy to use charger.
However, when balance charging, the fan goes up and down in speed all the time.
Guess it's because the fan speed is set to auto, and can be overridden using manual speed, but I would like it as low as possible all the time, not going up and down, but rather a steady pace.It is my first charger but I'm super happy with it.
I usually charge 2 batteries 2S 6000mhA (12A) and only now with more heat (summer time) is that the fan started to work is always fresh.
Not the cheapest Chargers but have 300W and 20A without a Power Supply its awsome ....
I would do it again!Good charger but a bit expensive.Ist mein erstes richtiges Ladegert, aber ich vollends begeistert! Die erste Bedienung bentigt zwar etwas Zeit zum Einlesen, aber das sollte man ja eh tun wenn man solche Gerte bedient.
Die Verarbeitung ist sehr gut und stabil.
Vom Funktionsumfang her ist er auch sehr gut ausgestattet und hat mir auch schon erfolgreich geholfen einen tiefenentladenen Akku zu retten!
Man hat die Wahl ob man das integrierte Netzteil nutzen mchte und das Ladegert ans Stromnetz anschliet, oder aber an eine andere Gleichstromquelle (wie zum Beispiel unterwegs an die Autobatterie).
Meiner Meinung nach sehr zu empfehlen!A great buy. This is actually combined Reaktor 300W 20A charger and Reaktor Pro 350W 23A PSU, and the combo is actually a rebrand of Junsi iCharger 206b and Junsi P350 350W PSU. So all quality parts! Charger and PSU are well combined so you can utilize full 300W. Both fans are independently temp controlled so during low power or cold temperatures it runs fan-less and on higher powers is slowly increases in speed/noise. Even on full 300W power it's not to loud. It has many features like resistance measuring (of each cell), regenerative/resitive 300W discharging and you can actually use it to charge LiHV packs since you can manually set termination voltage up to 4.35V/cell! I gave it 4 starts for quality since there is 1 fault on my unit, slight cracking/poping noise/coil wine. It's not loud and you notice it only when none of fans are running, but it's a shame since without it the charger would be perfect!This is an awesome charger. I had it for several months now, mostly charging lipos. I was often charging at 6s 13A and it got significantly warm, almost too warm to touch. I put a computer fan next to it and it was fine. I can only warmly recommend this product!It's my first charger but i like it :) Solid build, looks nice and lots of functions. Easy to use.