New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy Reaktor Pro 350W 23A Power Supply (100~240V AC)

Turnigy Reaktor Pro 350W 23A Power Supply (100~240V AC)

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

52,54 €
Stav:
Skladem
SKU:
9466000005-0
WANT FREE SHIPPING? Click here to find out more!

Serious power for your charger!

The Turnigy Reaktor Pro 350W 23A power supply was designed with simplicity in mind and to provide a stable, smooth voltage output to your charger (15~15.5V DC.) It has an efficiency of greater than 90%.

The Reaktor Pro 350W power supply has a built in fan for effective cooling and features over current and temperature protection.

Features:
• Overload protection
• Over temperature protection
• Short circuit protection
• Up to 350W output
• Better than 90% efficiency
• Built in cooling fan

Specs:
Input voltage: 100~240V AC
Input frequency: 50~60Hz
Output voltage: 15~15.5V DC
Output current: 35A
Output Watts: 350W
Dimensions 185 x 88 x 47mm
Weight: 680g

  • SKU 9466000005-0
  • Brand Turnigy
  • Kapacita ( mAh ) -
  • Hmotnost 1240.0000
  • Délka 220.00
  • Width 120.00
  • Výška 160.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I would recommend you to open it and see if the heat sink plate is tightended well, in my caase it wasn't. the capacitor is cheap 85 deg version and not the 105 deg version. I did charge it in max draw, capacitor didnt heat up much. i guess it will hold. will it do so in summers when it is all enclosed ? I dunno, need to wait and watch.

For the price, it is definetely worth it, will it last a lifetime? i doubt it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would recommend you to open it and see if the heat sink plate is tightended well, in my caase it wasn't. the capacitor is cheap 85 deg version and not the 105 deg version. I did charge it in max draw, capacitor didnt heat up much. i guess it will hold. will it do so in summers when it is all enclosed ? I dunno, need to wait and watch.

For the price, it is definetely worth it, will it last a lifetime? i doubt it

Great power supply. Provides very stable and high current to my reaktor 300w while charging a 6S lipo at 250w. Gets barely warm. High quality aluminium. Very good for the price, highly recommended.

Weighs around 650g by itself.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power supply. Provides very stable and high current to my reaktor 300w while charging a 6S lipo at 250w. Gets barely warm. High quality aluminium. Very good for the price, highly recommended.

Weighs around 650g by itself.

Use it with my QUATTRO Hobbyking charger. Works great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use it with my QUATTRO Hobbyking charger. Works great!

totally silent, runs the reactor charger no problem. bright blue LED when its on. came with a US plug kettle cord

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

totally silent, runs the reactor charger no problem. bright blue LED when its on. came with a US plug kettle cord

This is a powerful powersupply and goes well with the 300w reaktor charger.
This charger can draw approx 21A from the source supply. At 12V input, it'll draw approx 250 watts. Given minimum 90pcnt efficiency, it'll charge at over 230 watts with12V source supply. I like it a lot. Make some noise but barely noticeable. Runs warm.
Ideal setup : reaktor 350w powersupply, 300w charger, parallel charging board and you are good to go:)
Dropped a crown because for the price, you can always go for cheap power source (server power source for example) but for the avid and in-a-hurry-to-fly hobbyist, its good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a powerful powersupply and goes well with the 300w reaktor charger.
This charger can draw approx 21A from the source supply. At 12V input, it'll draw approx 250 watts. Given minimum 90pcnt efficiency, it'll charge at over 230 watts with12V source supply. I like it a lot. Make some noise but barely noticeable. Runs warm.
Ideal setup : reaktor 350w powersupply, 300w charger, parallel charging board and you are good to go:)
Dropped a crown because for the price, you can always go for cheap power source (server power source for example) but for the avid and in-a-hurry-to-fly hobbyist, its good!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save