New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy T600 Brushless Outrunner for 600 Heli (1400kv)

Turnigy T600 Brushless Outrunner for 600 Heli (1400kv)

Discontinued Product

Please continue searching for a similar product.
SKU:
T600-1400
WANT FREE SHIPPING? Click here to find out more!
Is your 600 heli ready for the next level in performance?!
We wont tell you anymore than to ensure you heli's bolts are tight and the main gears teeth are meshed correctly, because this motor is a torque monster!
 
Specifications:
Dimension: 58mm x 49mm, 78mm(with shaft)
Weight: 349g
Kv: 1400rpm/V
Turns: 8T
Voltage: 5~8S
Max Current: 110A
Diameter of shaft: 6mm
Length of front shaft: 21mm
ESC: 150A
 
 
  • SKU T600-1400
  • Brand -
  • Hmotnost 429.0000
  • Délka 140.00
  • Width 60.00
  • Výška 94.00
  • Kv (rpm / v) 1400.00
  • Maximální proudy (A) 110.00
  • Odpor ( mh) 7.00
  • Maximální napětí ( V) 30.00
  • Výkon ( W ) 3250.00
  • Hřídel A ( mm ) 6.00
  • Délka B ( mm ) 57.00
  • Průměr C ( mm ) 49.00
  • Může Délka D ( mm ) 33.00
  • Celková délka E ( mm ) 78.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hi, I use this motor on my HK550GT and it runs great on 6S, very powerfull and for my soft 3D flying does the job very well. After 6 min flight it is a little hot, but not too much. I use yep 150 ESC with it and 5000MAh Zippy 40C LiPo. The performance for my opinion is very good.

For motor mounting i had to make a small mod by cutting some carbon frame, but no big deal - very easy to modify and it is worth doing it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, I use this motor on my HK550GT and it runs great on 6S, very powerfull and for my soft 3D flying does the job very well. After 6 min flight it is a little hot, but not too much. I use yep 150 ESC with it and 5000MAh Zippy 40C LiPo. The performance for my opinion is very good.

For motor mounting i had to make a small mod by cutting some carbon frame, but no big deal - very easy to modify and it is worth doing it.

15 minutes of fligh with a 13T pinion, 2 zippy batteries in parallel 2700mah 6s, throttle at 54pcnt at max point and 12 pitch, obviously not 3D flight but awesome performance of this motor, only issue is that l had to break it apart to apply some CA between the shaft and the stator because after the first flight it got loose

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

15 minutes of fligh with a 13T pinion, 2 zippy batteries in parallel 2700mah 6s, throttle at 54pcnt at max point and 12 pitch, obviously not 3D flight but awesome performance of this motor, only issue is that l had to break it apart to apply some CA between the shaft and the stator because after the first flight it got loose

i purchased one of these for my hk600 heli yes you do have to take a small amount of frame away with a dremel so it misses the rotor it took me 5 minutes to do this its no big deal,well worth the bother for the extra bit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i purchased one of these for my hk600 heli yes you do have to take a small amount of frame away with a dremel so it misses the rotor it took me 5 minutes to do this its no big deal,well worth the bother for the extra bit

awesome power but it will require atleast 150 amp esc, i purchased the turnigy delux 100amp esc and it cant handle this motor with 550mm blades on my new hk550tt fbl. dont use it with anything smaller than 150amo esc. i hope someone read this and dont make the mistake i made .now i have to buy a bigger esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome power but it will require atleast 150 amp esc, i purchased the turnigy delux 100amp esc and it cant handle this motor with 550mm blades on my new hk550tt fbl. dont use it with anything smaller than 150amo esc. i hope someone read this and dont make the mistake i made .now i have to buy a bigger esc.

Doesn't fit the HK 600GT frame without modification,had it said this wouldn't of brought it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Doesn't fit the HK 600GT frame without modification,had it said this wouldn't of brought it.

Achtung!
Motor passt nicht in den hier angebotenen HK-600 GT

Advice:
these motor doesnt fit into the HK-600 GT

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Achtung!
Motor passt nicht in den hier angebotenen HK-600 GT

Advice:
these motor doesnt fit into the HK-600 GT

Second purchase. Fitting to hk550 gt . If it performs as well as the first one I will be stoked.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Second purchase. Fitting to hk550 gt . If it performs as well as the first one I will be stoked.

This motor only gets a 4 crown for overall rating because it is advertised as a 600 size motor yet does not fit a T-Rex 600 without modification. Frame has to be trimmed to allow for it width but after modification it works just fine in the 600. Also be nice if it included the mounting bolts and a pinion, the included bolts and pinion in T-Rex kits are not the right size.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor only gets a 4 crown for overall rating because it is advertised as a 600 size motor yet does not fit a T-Rex 600 without modification. Frame has to be trimmed to allow for it width but after modification it works just fine in the 600. Also be nice if it included the mounting bolts and a pinion, the included bolts and pinion in T-Rex kits are not the right size.

I bought this motor last year for my hauya 7 blade 4" edf , and didnt try it till this .What a power house at low cost, though i had to enlarge the housing in the fan to fit it .Well worth ,on 7S i get about 8.5 LB thrust at 127Ap close to 3000Wp .And i gone try it on 8S or 10S to see how much more can I get out it .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this motor last year for my hauya 7 blade 4" edf , and didnt try it till this .What a power house at low cost, though i had to enlarge the housing in the fan to fit it .Well worth ,on 7S i get about 8.5 LB thrust at 127Ap close to 3000Wp .And i gone try it on 8S or 10S to see how much more can I get out it .

great product, recommended!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great product, recommended!

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!