New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy TrackStar One Cell 120A 1/12th And 1/10th Scale Sensored Brushless Car ESC

Turnigy TrackStar One Cell 120A 1/12th And 1/10th Scale Sensored Brushless Car ESC

Discontinued Product

Please continue searching for a similar product.
Váha:
180 g
SKU:
TTS-120A-1S
WANT FREE SHIPPING? Click here to find out more!

Run out sale was $59.99 now only $39.99 only while stocks last!

The Turnigy TrackStar One Cell 1/12th and 1/10th scale ESC is the latest addition to Hobby Kings Sensored Car ESC range.

The TrackStar One Cell features a built in voltage booster for single cell Lipoly use in 1/12th and 1/10th scale racing. An additional heat sink and cooling fan have been included for 2S 1/10th race applications making the TrackStar One Cell a truly versatile ESC.

Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar One Cell 120A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. This translates in to very smooth start up and acceleration.

Timing Indicator LED.
To conform with ROAR's Sportsman Class racing rules and assist race organizers monitor driver compliance in non-timing modified race classes the TrackStar 1/10th ESC includes a timing mode indicator LED. At all times when the ESC is powered on and dynamic motor timing is set to a value greater than zero the white LED will illuminate indicating that the timing mode has been modified.

The Turnigy TrackStar One Cell 120A ESC also boasts a host of programing options not usually found in an ESC at this price and can be programmed with ease via the Turnigy TrackStar programing card (sold separately).

Specification:
Cont. Current: 120A
Burst Current: 200A
Motor Rotation: Fwd/Rev or Fwd/Brk
Input Power (Cells): 1-2S LiPo/LiFe, 3-6 NiMH (8.4V Max)
Motor Type: Sensored and sensorless Brushless Motors.
BEC Output: 6.0V, 1Amp, Built-in BEC with DC booster for 1 cell LiPo use.
Status LED (2 LEDs): White LED, 3 color LED (Red, Green & Orange)
Thermal Overload Protection: Yes
Dimensions (L*W*H/without fan): 36.5*42*18mm (1.44*1.65*0.71in)
Weight(Without wires): 34g (1.20oz)

Motor Limits
1S LiPo or 3-4S NiMH): ≥3.5T (1/12 on- road)
2S LiPo or 5-6S NiMH): ≥4.5T (1/10 on-road) ≥6.5T (1/10 off-road) *

Programming Options (Via Optional programming card or Throttle input)
Brake/Reverse type
Brake amount
Reverse amount
Punch Control
Drag Brake
Throttle Dead Band
Voltage Cut off
Motor Timing

Note: * 2S Lipoly use requires installation of the supplied heat sink and fan.

  • SKU TTS-120A-1S
  • Brand TrackStar
  • Kapacita ( mAh ) -
  • Hmotnost ( g ) 180.00
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I hope they keep licensing these from Toro/skyrc as they are solid units for blink needs. Granted it looks like the Gen II is taking this over. Easy to program and very easy to use.

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received two of these ESCs in the mail today. Absolutely thrilled with the build quality HK! After calibrating per instructions, tweaking with the programming card, installed pinion gear and took a few laps around the living room. Combined with the 8.5T Turnigy TrackStar...pulling wheelies with my Associated SC10. Racing tomorrow so durability test to come. Cant go wrong with this ESC.

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am running this in a Team Associated RC10L3 Pan Car
5.5T 6000KV HL540-3650 3G2P Sensored
ZIPPY Flightmax 4000mAh 2S1P 25C Car Lipoly (ROAR APPROVED) (USA Warehouse)
Robinson Racing Associated RC-10L SS Super Machined Spur 64p 78t
Robinson Racing Associated RC-10L SS Alum. Pro Pinion 64p 50t

I am getting speeds in excess of 50mph on the asphalt (I'm sure I can get allot faster)
Using the default settings the Motor and esc stay very cool and I am getting 20-25 minute run times (not on a track, just up and down my street)

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ESC supports sensor and sensorless motors, but this ESC brings significant "cogging" if it is used with sensorless motors. The cogging effect is much higher as it is typical for sensorless motors and some trimming cheats are necessary!

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

so far works great,the only thing i woud sugest it that the wires all be 12gauge for running pan car or 1/12. easy programing with card!! will need to get another for my stock.

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fitted this to my 1/10 turnigy sct with a trickster 4.5 turn motor and a 24 tooth drive gear and it flies! Total out of control power and more top end than the little car can handle. U should see the tires grow as u put the power down. Mental! I also waterproofed mine in plastidip to keep it safe. Love it!

Top Flight ESC for 1/4 the money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top Flight ESC for 1/4 the money!

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great esc for the money run it in my mardave and then use same esc in my 1/10 buggy get 2 esc for the price of one

works great in my mardave on 1s lipo no prob

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great in my mardave on 1s lipo no prob

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The ESC works great with every motor down to 3,5 Turns. Other ESC couldnt handle this motor. Bad thing is that the ESC plug doesnt deliver the 6V DC!! Solution is to plug the programming cable into the aux port of the receiver.

  1. 1
  2. 2
Customer files
One Cell Manual Download [689]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!