New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy™ TGY-565MG High Speed HV/DS/MG Servo w/Alloy Case 25T 5kg / 0.05sec / 40g

Turnigy™ TGY-565MG High Speed HV/DS/MG Servo w/Alloy Case 25T 5kg / 0.05sec / 40g

Shipped From:
  • Global
QTY:

Now save Uložit 0,00 € 0,00 €

44,77 €
Stav:
Skladem
SKU:
9355000056-0
WANT FREE SHIPPING? Click here to find out more!

These Turnigy high voltage digital servo's are the ultimate in precision and holding power. Turnigy knows the importance of a good, reliable and robust servo and these are up there amongst the best. The TGY-565MG features a full alloy case, dual ball bearing output shafts and a metal gear train.

To provide the best, most efficient performance these servos are designed to run on a variety of voltages from 6.0 up to 7.4V. In testing they have been able to withstand a lot of abuse and are perfect for the tail rotor on 450/500 size heli's or the demands of the 3D aircraft pilot.

The TGY-565MG is supplied with a variety of output arms and a complete mounting hardware pack.

Features:
• Full metal case
• High voltage input (6~7.4v)
• Excellent torque and speed
• Metal geared
• Twin ball bearings
• Perfect for 500 size helicopters
• Complete mounting hardware pack

Specs:
Model: TGY-565MG
Operating Voltage: 6~7.4v
Torque: 4kg@6v~5kg@7.4v
Speed: 0.06sec@6v~0.05sec@7.4v
Dimensions: 35.5x15x33mm
Weight: 40g
Working Frequency: 760us/560Hz
Motor: Coreless
Ball Bearing: 2BB
Gears: Metal
Gear Type: Digital
Servo Plug: JR type
Sevo Lead Length: 300mm
Spline Count: 25

  • SKU 9355000056-0
  • Brand Turnigy
  • Hmotnost 116.0000
  • Délka 80.00
  • Width 40.00
  • Výška 60.00
  • Točivý moment ( kg) (min . 0,01 kg ) 5.00
  • Rychlost ( Sec / 60deg ) 0.05
  • A ( mm ) 37.00
  • B ( mm ) 35.00
  • C ( mm ) 33.00
  • D ( mm ) 15.00
  • E ( mm ) 48.00
  • F ( mm ) 23.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

it runs nice and give the heli total 3d tail authority, but the quality control is a bit low.
i opened mine after initial flights to check out if the grease in the gear box to discover that it was a bit short of grease, after replenish, while screwing the long bolt back, observed that the walls where the bolts screwed were so thin that with the lightest torque the wall broke and NO more screw point to atach the bolt as it overwiden the hole. I believe that it may be a bad bach of upper case manufactuing. Now my servo only is tighten bolted on two points the other two are useless and i have had to use film tape to keep it tighten.
I would be very much please if hobbyking would send me a upper part of this servo, to leave as it should be and to avoid the jokes of my mates when stared at the servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it runs nice and give the heli total 3d tail authority, but the quality control is a bit low.
i opened mine after initial flights to check out if the grease in the gear box to discover that it was a bit short of grease, after replenish, while screwing the long bolt back, observed that the walls where the bolts screwed were so thin that with the lightest torque the wall broke and NO more screw point to atach the bolt as it overwiden the hole. I believe that it may be a bad bach of upper case manufactuing. Now my servo only is tighten bolted on two points the other two are useless and i have had to use film tape to keep it tighten.
I would be very much please if hobbyking would send me a upper part of this servo, to leave as it should be and to avoid the jokes of my mates when stared at the servo.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save