New Items Novinky Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Turnigy™ TGY-D56LV Coreless Low Voltage DS/MG Servo 0.89kg / 0.10sec / 5.6g

Turnigy™ TGY-D56LV Coreless Low Voltage DS/MG Servo 0.89kg / 0.10sec / 5.6g

Shipped From:
  • USA
  • Global
QTY:

Now save Uložit 2,30 € 2,30 €

Special Price 4,28 € 4,28 €

You save Uložit 2,30 € 2,30 €

Was  6,58 €

Stav:
Skladem
SKU:
9399000024-0
WANT FREE SHIPPING? Click here to find out more!

The Turnigy D56LV is great for small gliders and DLGs, or just about any other mini airplane using single cell LiPoly batteries (3.7V) and where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price.

Specs:
Weight: 5.6g
Dimension: 19.8x8.2x20mm
Stall torque: 0.7kg/cm (3.7V) - 0.89kg/cm (5.5V)
Operating speed: 0.12sec/60degree(3.7v) - 0.10sec/60degree(5.5V)
Operating voltage: 3.7~5.5V
Spline Count: 20T
Type: Digital
Motor: Coreless
Servo lead: 150mm length
Servo plug: JR (Fits JR and Futaba)

  • SKU 9399000024-0
  • Brand Turnigy
  • Hmotnost 15.0000
  • Délka 90.00
  • Packaging Width 10.00
  • Výška 50.00
  • Točivý moment ( kg) (min . 0,01 kg ) 1.20
  • Rychlost ( Sec / 60deg ) 0.10
  • A ( mm ) 27.00
  • B ( mm ) 20.00
  • C ( mm ) 24.00
  • D ( mm ) 8.20
  • E ( mm ) 28.00
  • F ( mm ) 16.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 4 Servos for a Mini DLG. Checked on 1s Lipo at 4.2V with Graupner GR12 Hott receiver. First Servo was completely dead, two others where shaking constantly, the last one seemed to work, but with no accuracy at all. I won't give it a try on a plane. As shipping to England for warranty refund is too expensive, its a complete loss! I can NOT recommend these Servos!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 Servos for a Mini DLG. Checked on 1s Lipo at 4.2V with Graupner GR12 Hott receiver. First Servo was completely dead, two others where shaking constantly, the last one seemed to work, but with no accuracy at all. I won't give it a try on a plane. As shipping to England for warranty refund is too expensive, its a complete loss! I can NOT recommend these Servos!

I wanted to like this servo. The housing came apart and the mounting tabs cracked on all three servo's that I installed in a helicopter. I can not recommend this servo for anything but the smallest most delicate models. They function well and are fast, but the housing is very very delicate. I can assure you I didn't mistreat them in any way and did a careful install. Eh what can you do?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wanted to like this servo. The housing came apart and the mounting tabs cracked on all three servo's that I installed in a helicopter. I can not recommend this servo for anything but the smallest most delicate models. They function well and are fast, but the housing is very very delicate. I can assure you I didn't mistreat them in any way and did a careful install. Eh what can you do?

2 out 5 have jitter, I guess this is a pot related issue.
Probably I will won't by them anymore and switch to other servos... A bit disappointed I would say.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

2 out 5 have jitter, I guess this is a pot related issue.
Probably I will won't by them anymore and switch to other servos... A bit disappointed I would say.

Extremely small servos and cheap for metal gear. The built is good and the servos have high torque for this small size.

Nevetheless the jitter is totally crazy on all 4 servos I bought, I have never seen jitter this bad before. They are totally useless in any application where prescision is needed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Extremely small servos and cheap for metal gear. The built is good and the servos have high torque for this small size.

Nevetheless the jitter is totally crazy on all 4 servos I bought, I have never seen jitter this bad before. They are totally useless in any application where prescision is needed.

Sorry, can't give more than one "crown" for this servo. It is not usable because of the highest jitter I've ever seen on a servo. I tested it with two different RX and with two different servotesters. I even checked different working frequencies. But nothing helps against this jitter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sorry, can't give more than one "crown" for this servo. It is not usable because of the highest jitter I've ever seen on a servo. I tested it with two different RX and with two different servotesters. I even checked different working frequencies. But nothing helps against this jitter.

I have build the second plane with this servos on all surfaces. First a CLIK NG then an Eraser V3 EPP. Servos are very precise, fast, and without gear slope. BEC is the one in the Plush 10A, powered from 2s/260mA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have build the second plane with this servos on all surfaces. First a CLIK NG then an Eraser V3 EPP. Servos are very precise, fast, and without gear slope. BEC is the one in the Plush 10A, powered from 2s/260mA.

I baught 4 of these, they are indeed very smal and light but thats about it...they are unreliable, and highly inaccurate...3 of the 4 i baught barely find there positon, and if only with lots of jitters...and even the fourth one start to jitter after a while unless you place it on its neutral positon (no matter if a servo tester is used or your TX/RX)...for use on controlsurfaces or other steering funktions totaly useless...mabye they work on flaps or some other special funktion that is not vital in any way to your model...so I CAN NOT recomment these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I baught 4 of these, they are indeed very smal and light but thats about it...they are unreliable, and highly inaccurate...3 of the 4 i baught barely find there positon, and if only with lots of jitters...and even the fourth one start to jitter after a while unless you place it on its neutral positon (no matter if a servo tester is used or your TX/RX)...for use on controlsurfaces or other steering funktions totaly useless...mabye they work on flaps or some other special funktion that is not vital in any way to your model...so I CAN NOT recomment these.

Really much better than HV version of the same servo. All 4 that I purchased - works, Zero is stable. Very thin - I use they on glider ailerons

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really much better than HV version of the same servo. All 4 that I purchased - works, Zero is stable. Very thin - I use they on glider ailerons

This is an excellent servo. It has more strength than an hxt900 at a fraction of the weight. Excellent buy overall.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an excellent servo. It has more strength than an hxt900 at a fraction of the weight. Excellent buy overall.

First impression: not so bad like his HV counterpart ! Resolution, power and speed seems equal but somewhat bigger deadband, circa 5-6 microsec and not equally distributed among end positions. 2*4 stars, and one 3 stars due to price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impression: not so bad like his HV counterpart ! Resolution, power and speed seems equal but somewhat bigger deadband, circa 5-6 microsec and not equally distributed among end positions. 2*4 stars, and one 3 stars due to price.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking