Registrovat

Product Finder

Nastavení

Useful links

 
[["US","AU","GB","DE"]]
Registrovat
Shipped From:
  • Global
  • USA

Turnigy™ TGY-D56MG Coreless DS/MG HV Servo 1.2kg / 0.10sec / 5.6g

Turnigy™ TGY-D56MG Coreless DS/MG HV Servo 1.2kg / 0.10sec / 5.6g

QTY:

Now save Uložit 0,00 € 0,00 €

5,93 €
Stock:
Váha:
17 g
SKU:
9399000023-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
servo
acc
Popis
produktu

The Turnigy D56MG HV is great for small 3D planes and parkflyers where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price. The HV voltage lets you use a 2s Lipo or LiFE battery directly with no need for a BEC.

Specs:
Weight: 5.6g
Dimension: 19.8x8.2x21.2mm
Stall torque: .85kg/cm (4.8V) - 1.2kg/cm (7.4V)
Operating speed: 0.14sec/60degree(4.8v) - 0.1sec/60degree(7.4V)
Operating voltage: 4.8-7.4V
Spline Count: 20T
Servo Plug: JR (Fits JR and Futaba)

Product
Specifications

Další informace

  • SKU:
    9399000023-0
  • Brand:
    Turnigy
  • Hmotnost ( g )
    17.00
  • Délka
    90.00
  • Width:
    20.00
  • Výška:
    50.00
  • Rychlost ( Sec / 60deg )
    0.10
  • Točivý moment ( kg) (min . 0,01 kg )
    1.20
  • Unit Weight (g):
    5.6
  • A ( mm ):
    27.00
  • B ( mm )
    20.00
  • C ( mm )
    24.00
  • D ( mm ):
    8.20
  • E ( mm ):
    28.00
  • F ( mm )
    16.00
Community
Discussions
Rate&
Review

Napište vlastní recenzi

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
very small servo and light wegiht. also it can handle "high voltage" you can use this widely.
Quality
Value
Overall
Quality
Value
Overall
This servo is poor quality, and not worth it's price.

I've tested the servo with the HobbyKing LED servo tester and when the servo reaches the extreme signal of 230 it stays locked (jammed) in the extreme position. The good quality servo should not lock up when extreme signal is received.

I initially intended to use these servos for my fixed wing, but knowing the nature of the failure I would not recommend anyone to use these on the air frames of any kind.

Quality
Value
Overall
Quality
Value
Overall
I have installed quite a few of these in some mini FPV wings that I built for me and some friends of mine. All have worked out super well. Running them at 5V off the BEC of a 12A ESC.
Quality
Value
Overall
Quality
Value
Overall
1A Servos.
Benutze die Servos an einen 2S-Lipo. Habe aber zur Sicherheit immer eine Diode 1N4001 in Reihe vor jedes Servo geltet.
Die Servos haben eine ausgezeichnete Rckstellgenauigkeit, kein Spiel und fr ihre Gre
enorm viel Kraft.
Absolut zu empfehlen.
Quality
Value
Overall
Quality
Value
Overall
These Turnigy DSGMG servos appear to be well made. I bought four of them for their "HV" capability to use in a HobbyKing DLG. Apart from the motor pinion and its mating gear which were nylon, the remaining gear-train is all aluminium.

I used a two cell 300mAh Turnigy LiPo to power the two servo set-up in my DLG. Both servos failed within five minutes of powering-up. They ceased to work accompanied by a burning smell. A very disappointing result, hence the poor score.
Mark S.
Quality
Value
Overall
Quality
Value
Overall
je les ai achet? pour mon Extra 300L 3D et j'ai peu qu'il soit un peu faiblard et en, plus je les trouve lents
Quality
Value
Overall
Quality
Value
Overall
Received these servo's yesterday, tested them right away because I was not completely confident that they would function on 2S (there are some messages about them burning on 2S - 8,4V and the technical data on the Hobbyking site and the packaging of the servo state an operating voltage up to 7,4V). First test on 5V with a BEC, than on 6V with BEC, after that on 7,4V on a half charged 2S battery without BEC and final test with fully charged 2S battery. The servo's held up great but are a bit slow on 5V. On 8,4 Volt they rock, very strong, fast and accurate! Going to build them in my Binary V2 DLG. Total weight of the electronics (diversity 6CH LemonRX, 260mAh battery and the three servo's) below 40 grams. Looks promising.
Quality
Value
Overall
Quality
Value
Overall
Very Great Servo! Using these on my FT Might Mini Arrow.
Quality
Value
Overall
Quality
Value
Overall
this is an awesome servo. very strong and accurate for its size. which makes it perfect for small park flyer models (I put them in my bonsai) or where size is a problem such as bomb bay doors or flaps where the servo is in the wing. would definitely recommend these and I will be buying more for future models or t have around as spares.
Quality
Value
Overall
Quality
Value
Overall
Wer 2s fhige DLG Servos sucht wird hier bitter enttuscht!

Hab mir 6 von diesen Servos bestellt und habe 2 davon an 2S Lipo getestet. Ergebnis: Beide reif fr die Tonne... Die brigen 4 habe ich ber ein 2A Bec zu 6 Volt getestet und die gehen noch, allerdings ist mir die Spannung beim Anschlu des 4en Servos die Spannung eingebrochen was ja irgendwie nicht sein kann(oder ziehen die Dinger bei 0 Last mehr als 2A!!). Wie dem auch sei, mein Fazit ist: Nicht verwenden, definitiv nicht 2S fest. Finger weg
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
servo
acc

Štítky produktu

Štítky oddělujte mezerou. Víceslovné uzavřete v apostrofech (').