New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Voltage Booster for BEC

Voltage Booster for BEC

Discontinued Product

Please continue searching for a similar product.
SKU:
Vol-Booster
WANT FREE SHIPPING? Click here to find out more!
Lipoly Single cell voltage booster for Receivers
This little unit plugs into your single cell lipoly and will boost the voltage to 5V, allowing you to run a receiver on a single cell lipo!
Why would you want to do this? Less weight of course!
 
Operating Voltage : 2.7V - 4.2V
Operating Current : 1A
Max operating Current : 1.5A 
  • SKU Vol-Booster
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 19.0000
  • Délka 45.00
  • Packaging Width 4.00
  • Výška 12.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Works as described. I use the in my DLG 1000mm Wingspan with a Turnigy nano-tech 750mAh 1S 35-70C Lipo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works as described. I use the in my DLG 1000mm Wingspan with a Turnigy nano-tech 750mAh 1S 35-70C Lipo.

Mine came with the sticker on the back the wrong way around.
It didn't make sense the connectors were selected that way so beofre I plugged the batt in I came here and checked on the picture above to be sure.
It works fine just make sure yours looks like the one above in on the 3 pin side and out on the cable side

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine came with the sticker on the back the wrong way around.
It didn't make sense the connectors were selected that way so beofre I plugged the batt in I came here and checked on the picture above to be sure.
It works fine just make sure yours looks like the one above in on the 3 pin side and out on the cable side

Ive got 2 and both of them in a 4.2v charged LiPo, delivers only 4.00v...
Whats happening?

Thanks in advance

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive got 2 and both of them in a 4.2v charged LiPo, delivers only 4.00v...
Whats happening?

Thanks in advance

gives your bec just that little boost

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

gives your bec just that little boost

Otimo produto! Recomendo a compra!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Otimo produto! Recomendo a compra!

it's very good stuff for a HL Gliders

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it's very good stuff for a HL Gliders

Pouijem pre npjanie serv a prmaa do minivetroa. Uvidme ako to bude fungova.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pouijem pre npjanie serv a prmaa do minivetroa. Uvidme ako to bude fungova.

works well with 1s lipo and orangeRx r610 and 4 dymond servos (but not sure how good you'd do with servos that draw more than that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works well with 1s lipo and orangeRx r610 and 4 dymond servos (but not sure how good you'd do with servos that draw more than that

fr kleine und leichte Segler ist das die perfekte Spannungsversorgung, das Servokabel ist ein wenig kurz aber das strt mich nicht wirklich

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fr kleine und leichte Segler ist das die perfekte Spannungsversorgung, das Servokabel ist ein wenig kurz aber das strt mich nicht wirklich

Currently using this on one of my 1/12th pan cars. Very easy to use. Trouble-free after 2 race meets. Based on some RC forum tips, I have soldered a female Futaba servo plug to the battery's positive & negative post instead of soldering to this booster directly. This allows me to swop boosters without unsoldering, if need be. I've got the Novak SmartBoost on my other pan car and this HobbyKing one is so much smaller & cheaper. Excellent alternative.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Currently using this on one of my 1/12th pan cars. Very easy to use. Trouble-free after 2 race meets. Based on some RC forum tips, I have soldered a female Futaba servo plug to the battery's positive & negative post instead of soldering to this booster directly. This allows me to swop boosters without unsoldering, if need be. I've got the Novak SmartBoost on my other pan car and this HobbyKing one is so much smaller & cheaper. Excellent alternative.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!