This servo is big enough to handle large antenna tracking systems for FPV!
This 360 degree servo can perform up to 6 complete revolutions and with it's fast response and good reslution provide smooth antenna tracking opperation.
You can also use it for a sailboat winch too!
Dual ball bearings
Futaba style splines
Heat sink aluminum middle casing
Weight: 64 grams / 2.26 oz.
Dimensions: 40 x 25 x 49 mm / 1.57 x 0.98 x 1.93 inch
Torque At 6.0V: 9.8kg-cm , 136.04 oz-in
Torque At 7.2V: 12kg-cm , 166.65 oz-in
Speed At 6.0V: 0.9 sec / 360° at no load
Speed At 7.2V: 0.75 sec / 360° at no load
Hmotnost ( g )
Rychlost ( Sec / 60deg )
Točivý moment ( kg) (min . 0,01 kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
F ( mm )
. 1.5Servo is fine but the biggest problem I have is the splines are NOT futaba. They are much larger than futaba, so if you purchase to change the servo horn the servo is pretty much useless.Hello
servo arrived with wrong accessories (wheel) with different size/diameter of splines. Wheel is for different servo.
Otherwise I'm happy with thist servo, I will use it for FPV ground station, but I have to find a horn/wheel that will work with this servo.pedaso de maquinon este servoI got similar analog winch from r2 hobbies before, this is the same model and work great even for a 1 meter sailboat on 5AA pack.Have not yet fitted it to a boat but it has tested ok. Appears well made for the price but is a bit slow and only does a total of two revolutions. The drum is only 31mm or 1.25inches in diameter so it shouldn't have a problem pulling on a fair sized sail. Hope this helps