New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

X43A Scramjet w/ Brushless EDF Plug-n-Fly

X43A Scramjet w/ Brushless EDF Plug-n-Fly

Discontinued Product

Please continue searching for a similar product.
Váha:
1689 g
SKU:
X43A
WANT FREE SHIPPING? Click here to find out more!
Are you tired of seeing the same planes at your local club?
The X43A is a very unusual NASA hypersonic test jet rc model, equipped with a strong 64mm EDF power system and 30A ESC combined with the unusual aerodynamic shape of the X43A and you will soon be screaming through the sky leaving onlookers wondering. All the servos are pre-installed and you just need to include 3S battery and your own receiver to put it through a test flight.

Certainly a conversation starter at any club or flying field.


Spec.
Length : 952mm
Wing Span: 660mm
Flying Weight: 585g
Thrust: 600g
Servo: 3x9g
Motor: Powerful Brushless Outrunner 4100kv 
ESC: 30A
Duct fan: 64mm

Required:
Your own TX & RX
1300mah 3S Lipo 

  • SKU X43A
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost ( g ) 1689.00
  • Délka 995.00
  • Width 205.00
  • Výška 305.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

My flight video can be found under: RC Scramjet x-43 on youtube
It flies great but it`s tricky to see the angle of the plane have put some yellow stripes on the bottom, also put some strong packing tape on the edf bottom if you land it without gear

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My flight video can be found under: RC Scramjet x-43 on youtube
It flies great but it`s tricky to see the angle of the plane have put some yellow stripes on the bottom, also put some strong packing tape on the edf bottom if you land it without gear

Flew it for the first time, grass was too long so i hand launched it,,it flew like a trainer, maintained level flight at 1/2 throttle, loops and rolls like a pattern plane.



Great low speed handling for landing. I will put daryglow orange stickers on the fins and bottom. In some flight attitudes it looks like a thin black line in the sky!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flew it for the first time, grass was too long so i hand launched it,,it flew like a trainer, maintained level flight at 1/2 throttle, loops and rolls like a pattern plane.



Great low speed handling for landing. I will put daryglow orange stickers on the fins and bottom. In some flight attitudes it looks like a thin black line in the sky!!!

plane arrived a month after i ordered it,my guess is U.S customs.did not have enough power to stay in the air.used 2200 mah battery,still nothing im going to use the aircraft for parts now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plane arrived a month after i ordered it,my guess is U.S customs.did not have enough power to stay in the air.used 2200 mah battery,still nothing im going to use the aircraft for parts now.

A flying video can be found on youtube just search for

RC Scramjet x-43

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A flying video can be found on youtube just search for

RC Scramjet x-43

I had my maiden flight and it was quite dificult to see if the plane is flying upwards or downwards. I flew it without gear and landed it on the bottom, needs to be strenght. It flys quick and looks very nice in the sky but it is tricky to recognise the planes angle. lands nice and quick. I`m thinking about a better EDF Motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had my maiden flight and it was quite dificult to see if the plane is flying upwards or downwards. I flew it without gear and landed it on the bottom, needs to be strenght. It flys quick and looks very nice in the sky but it is tricky to recognise the planes angle. lands nice and quick. I`m thinking about a better EDF Motor

nice finish, easy to assemble HOWEVER very difficult to fly - hard to control, EDF to weak, easy stall but - I must admit - lands nice and quick. Not recommended for beginner pilot.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice finish, easy to assemble HOWEVER very difficult to fly - hard to control, EDF to weak, easy stall but - I must admit - lands nice and quick. Not recommended for beginner pilot.

This plane arrived quickly and was delivered without damage. It flies nicely for the most part, however not recommended as a first edf plane. One important thing to note is that it easily stalls during turns and is very hard to recover from stalls. Make sure than when turning you keep the speed up. It is quite durable, however, and on a bad crash into the ground (because of stalling) only the nose broke off, which is easily repaired.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane arrived quickly and was delivered without damage. It flies nicely for the most part, however not recommended as a first edf plane. One important thing to note is that it easily stalls during turns and is very hard to recover from stalls. Make sure than when turning you keep the speed up. It is quite durable, however, and on a bad crash into the ground (because of stalling) only the nose broke off, which is easily repaired.

Got mine in a couple days ago, put it together and flew my maiden today.

I had the servo throws waaaay too far. It was extremely uncontrollable and I flew it into the ground. It was my first time flying a delta wing, and it was the first time using my transmitter, so it was actually my fault for not taking it easy on the servo throws.

Before flight I painted the underside a different color (strongly recommended).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine in a couple days ago, put it together and flew my maiden today.

I had the servo throws waaaay too far. It was extremely uncontrollable and I flew it into the ground. It was my first time flying a delta wing, and it was the first time using my transmitter, so it was actually my fault for not taking it easy on the servo throws.

Before flight I painted the underside a different color (strongly recommended).

plane arrived only three days after ordered with only miner damage to the under side of the fuselage.The foam appears to be good quality and is much bigger than appears in the pictures. will post the flight performance soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plane arrived only three days after ordered with only miner damage to the under side of the fuselage.The foam appears to be good quality and is much bigger than appears in the pictures. will post the flight performance soon.

Customer files
Deans to XT60 Converters Download [34]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!