New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

XK2445-3500KV Brushless Inrunner

XK2445-3500KV Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Váha:
93 g
SKU:
9393000009
WANT FREE SHIPPING? Click here to find out more!

XK2445-3500KV Brushless Inrunner

Specs.
# of poles: 4
Max Amps: 28A
Max Volt: 8.4V
Max Watts: 235W
Rpm/V: 3500kv
Resistance: 0.056 ohms
No-load Current: 1.9A
Dimension: 24mm x 45.0mm
Mounting hole depth: 4.5mm
Length of extend Shaft: 11mm
Shaft diameter: 0.3mm
Weight: 75.6g

  • SKU 9393000009
  • Brand Turnigy
  • Hmotnost ( g ) 93.00
  • Délka 70.00
  • Width 25.00
  • Výška 35.00
  • Kv (rpm / v) 3500.00
  • Maximální proudy (A) 28.00
  • Odpor ( mh) 56.00
  • Maximální napětí ( V) 8.00
  • Výkon ( W ) 235.00
  • Hřídel A ( mm ) 0.30
  • Délka B ( mm ) 45.00
  • Průměr C ( mm ) 24.00
  • Může Délka D ( mm ) 43.00
  • Celková délka E ( mm ) 57.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

not direct fits for 1/16. mounting holes will not lign up with your 1/16 models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not direct fits for 1/16. mounting holes will not lign up with your 1/16 models.

bought 3 of them. 2 for kyosho blizzard (it has very momentary transmission) so it is ok.
but x-ray m18t pro with this motor and big wheels and 15t pinion starts with difficulties though another motor ~18t starts ok. so it is sad for me. I suppose that this motor has ~10 turns and cannot be used in 1/18 truggy and monsters.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought 3 of them. 2 for kyosho blizzard (it has very momentary transmission) so it is ok.
but x-ray m18t pro with this motor and big wheels and 15t pinion starts with difficulties though another motor ~18t starts ok. so it is sad for me. I suppose that this motor has ~10 turns and cannot be used in 1/18 truggy and monsters.

MOTOR NOT USABLE OUT OF THE BOX. Exactly as Whipper snapper, bought two of these motors and they both aren't spinning free because the rotor is too tight between the bearings. I tried to open it to try and solve this problem myself but the two phillips screws are impossible to unscrew, I am worried I'll strip the head and end up doing a butcher job just to make the motor usable. I'll come back for an update when I get the time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

MOTOR NOT USABLE OUT OF THE BOX. Exactly as Whipper snapper, bought two of these motors and they both aren't spinning free because the rotor is too tight between the bearings. I tried to open it to try and solve this problem myself but the two phillips screws are impossible to unscrew, I am worried I'll strip the head and end up doing a butcher job just to make the motor usable. I'll come back for an update when I get the time.

I bought the motor and found that the rotor is rotating too tough. The size of rotor is large so bearins are blocked. Bad quality. Motor heats up very quickly. Working only on 2S to get full power. 3S block my ESP at full power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought the motor and found that the rotor is rotating too tough. The size of rotor is large so bearins are blocked. Bad quality. Motor heats up very quickly. Working only on 2S to get full power. 3S block my ESP at full power.

Brought 2 of these used one for replacement motor on my Centurion Mini catamaran old one being a 3000kv finally died after 2 years of hard runs...this was a great replacement feels a bit faster but glad made the purchase not over-heating problems def recommend it for the Centurion...i running 35amp esc with 25c 2200mh 3S pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brought 2 of these used one for replacement motor on my Centurion Mini catamaran old one being a 3000kv finally died after 2 years of hard runs...this was a great replacement feels a bit faster but glad made the purchase not over-heating problems def recommend it for the Centurion...i running 35amp esc with 25c 2200mh 3S pack

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!